June

19

175 Ton x 12′ Used Accurpress CNC Hydraulic Press Brake, Mdl. 717512, ETS 2000 2 Axis CNC Back Gauge (Pedestal), Foot Pedal, Emergency Stop, Year (2009) #C5095

175 Ton x 12′ Used Accurpress CNC Hydraulic Press Brake, Mdl. 717512, ETS 2000 2 Axis CNC Back Gauge (Pedestal), Foot Pedal, Emergency Stop, Year (2009) #C5095 626-444-0311 http://www.sterlingmachinery.com/press_brakes.php DETAILED SPECIFICATION Capacity (Mild Steel) 175 Ton x 12′ Throat 10″ Distance Between Housings 124″ Length Of Bed And Ram 144″ Backgauge Yes Back Gauge Range […]

c5095_2
June

19

175 Ton x 14′ Used Accurpress CNC Hydraulic Press Brake, Mdl. 717514, Accurpress CNC Gauge System Controller, ETS Pedestal Control, STI Light Curtains, Foot Pedal, Oil Cooler, #A4754

175 Ton x 14′ Used Accurpress CNC Hydraulic Press Brake, Mdl. 717514, Accurpress CNC Gauge System Controller, ETS Pedestal Control, STI Light Curtains, Foot Pedal, Oil Cooler, #A4754 626-444-0311 http://www.sterlingmachinery.com/press_brakes.php DETAILED SPECIFICATION Tonnage 175 Ton CNC Axis 2 Axis Type CNC/ Hydraulic Bed Length 168″ Reservoir Capacity 50 U.S. Gallons Safety Curtains Yes Throat 10″ […]

a4754_14
June

19

7″ x 11″ Used Trademaster Horizontal Bandsaw, Mdl. # 100, #A4745

7″ x 11″ Used Trademaster Horizontal Bandsaw, Mdl. # 100, #A4745 626-444-0311 http://www.sterlingmachinery.com/saws.php  

a4745_9_1
June

19

2″ Used Burgelu Cylindrical Die Thread Rolling Machine, Some Tooling Included, #A4434

2″ Used Burgelu Cylindrical Die Thread Rolling Machine, Some Tooling Included, #A4434 626-444-0311 http://www.sterlingmachinery.com/rolls.php

A4434_9_1
June

19

60 Ton x 5″ Used Minster OBI Double Geared Head Punch Press, Mdl. #6, Dual Palm Control with E-Stop, Helm Loadgard Tonnage Monitor, Inch/Single/Continuous Modes, Hilma Clamping System for Bed and Slide, Air & Clutch Brake, Stroke Counter, Forward & Reverse Motor Control, #A4752

60 Ton x 5″ Used Minster OBI Double Geared Head Punch Press, Mdl. #6, Dual Palm Control with E-Stop, Helm Loadgard Tonnage Monitor, Inch/Single/Continuous Modes, Hilma Clamping System for Bed and Slide, Air & Clutch Brake, Stroke Counter, Forward & Reverse Motor Control, #A4752   http://www.sterlingmachinery.com/presses.php DETAILED SPECIFICATION Tonnage 60 Ton Voltage 480V ~ 3 […]

a4752_11
June

14

220 Ton x 14′ Used Amada Promecam Hydraulic CNC Press Brake, Mdl. HFBO220-40, Operatuer CNC Programmable Backgauge, Amada Quick Change Ram Clamps, Foot Pedal, Light Curtains, #A4748

  220 Ton x 14′ Used Amada Promecam Hydraulic CNC Press Brake, Mdl. HFBO220-40, Operatuer CNC Programmable Backgauge, Amada Quick Change Ram Clamps, Foot Pedal, Light Curtains, #A4748 626-444-0311 http://www.sterlingmachinery.com/press_brakes.php DETAILED SPECIFICATION Capacity (Mild Steel) 220 Ton x 14′ CNC Axis 2 Axis Mild Steel 1/4″ Stainless Steel 10 Ga. Tonnage 220 Tons Length Of […]

img_20170428_154448
June

14

20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Controls, Stand, #8493

20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Controls, Stand, #8493 626-444-0311 http://www.sterlingmachinery.com/used-airam-air-cut-off-press-13897.html EQUIPPED WITH Air Tank Lite Touch Infrared Dual Hand Controls Stand

8493_3
May

25

20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Controls, Stand, #8493

20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Controls, Stand, #8493 626-444-0311 http://www.sterlingmachinery.com/presses.php EQUIPPED WITH Air Tank Lite Touch Infrared Dual Hand Controls Stand

8493_3
May

18

9″ x 42″ Used Birmingham (VARIABLE SPEED) Vertical Milling Machine, Mdl. BPV-3942, Hardened & Ground Ways, Chromed Quill-Honed Head, One Shot Lube System, Front & Rear Chip Guard, Meehanite Castings, #A4824

  9″ x 42″ Used Birmingham (VARIABLE SPEED) Vertical Milling Machine, Mdl. BPV-3942, Hardened & Ground Ways, Chromed Quill-Honed Head, One Shot Lube System, Front & Rear Chip Guard, Meehanite Castings, #A4824 626-444-0311 http://www.sterlingmachinery.com/brand-new-birmingham-variable-speed-vertical-milling-machine-14065.html DETAILED SPECIFICATION Table Size 9″ x 42″ Distance From Spindle to Table 18″ Longitudinal Traverse Hand Only 28-1/2″ Distance From Center […]

a4824
May

18

1-1/4″ Used KBC Machinery (Supertec Copy) Centerless Grinder, Mdl. C-12, Hydraulic Wheel Dressers, Through Feed Work Rest, Coolant System, Nice Condition (1996) #A4826

  1-1/4″ Used KBC Machinery (Supertec Copy) Centerless Grinder, Mdl. C-12, Hydraulic Wheel Dressers, Through Feed Work Rest, Coolant System, Nice Condition (1996) #A4826 626-444-0311 http://www.sterlingmachinery.com/used-supertec-centerless-grinder-14044.html  

A1464_1_2
« Previous Entries Next Page »