Categories

Brands

October

21

20″ x 60″ Used Daewoo Engine Lathe, Mdl. A20, 12″ 3 Jaw Chuck, (2) Steady Rests, Work Light, Chip Tray, Coolant System, Taper Attachment, 4 Jaw Chuck, 4 Way Rapid Traverse, #A4109

Category Lathes, Machinery, machines, sell, Used MachineryTags: 20" x 60" Used Daewoo Engine LatheNo brands

20″ x 60″ Used Daewoo Engine Lathe, Mdl. A20, 12″ 3 Jaw Chuck, (2) Steady Rests, Work Light, Chip Tray, Coolant System, Taper Attachment, 4 Jaw Chuck, 4 Way Rapid Traverse, #A4109

http://www.sterlingmachinery.com/11047/Daewoo+A20/

www.SterlingMachinery.com

626-444-0311

Full Description

Swing Over Bed:	20.5″
Swing Over Cross Slide:	11.75″
Distance Between Centers:	60″
Spindle Speeds:	18, 2,000 RPM
Spindle Nose:	D1- 8
Hole Thru Spindle:	3″
Threads:
Inch:	2 – 80 TPI
Metric:	0.75 – 14MM
Feeds:	0.0023″ – 0.062″
Cross Slide Travel:	12″
Tailstock Quill Travel:	12″
Tailstock Quill Taper:	#4MT
Horsepower:	10 H.P.
Voltage
Dimensions (L x W x H):	135″ x 55″ x 56″
Weight:	7,000 Lbs.

No comments yet.

Leave a comment

« 15″ x 17″ Used W.F. Wells Automatic Horizontal Bandsaw (Twin Post Design), Mdl. F-15, Hydraulic Bar Feed With Multiple Index, Hydraulic Vise, Coolant System, Blade Brush, Hydraulic Blade Tension, Twin Post Design, Discharge Table, #A4067 | 16″/22″ x 60″ Used South Bend Turn-Nado Gap Bed Engine Lathe, Mdl. SB1015, Fagor 2 Axis Digital Readout System, 10″- 3 Jaw Chuck, Coolant System, Splash Guard, Tailstock, Chasing Dial, Foot Brake, Baldor Variable Speed Control, RPM LCD Meter, #A4110 »

Weblog powered by Wordpress.

Theme Design by Devolux.org. Icons by famfamfam.com.

Copyright © 2009. All rights reserved.