10
4000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine, Mdl. NF-PRO 315 Vento, CNC Control Unit, Cutting Head, Suction System, Resonator, Hydraulic Blocks, Sheet Holder, Signal Lamp, Filter For Exhaust Gases, Rack Pinion, QBH Cable Entry For Laser Beam, Extended Protective Glass For Ray Efficiency, Colimation Module With Automatic Adjustment Of Focus Position, Enhanced Safety Cartridge Cover, Developed With Ceramic Adapter, Crust Reduction Control, Blow Piercing, Head Retraction Method, Lateral Air Blowing System, 3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC, Installation, Training (4 Days), #SMNFPRO315VENTO
fiber laser, laser, Machinery, machines, sale
Tags: #SMNFPRO315VENTO, 3rd & 4th Super High-Pressure Gas Line, 4000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine, Adjustable via CNC, Blow Piercing, CNC Control Unit, Colimation Module With Automatic Adjustment Of Focus Position, Crust Reduction Control, Cutting Head, Developed With Ceramic Adapter, Enhanced Safety Cartridge Cover, Extended Protective Glass For Ray Efficiency, fiber laser, Filter For Exhaust Gases, Head Retraction Method, Hydraulic Blocks, Installation, Laser, lasers, Lateral Air Blowing System, Mdl. NF-PRO 315 Vento, QBH Cable Entry For Laser Beam, Rack Pinion, Resonator, Sheet Holder, Signal Lamp, Suction System, Training (4 Days)No brands
4000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine, Mdl. NF-PRO 315 Vento, CNC Control Unit, Cutting Head, Suction System, Resonator, Hydraulic Blocks, Sheet Holder, Signal Lamp, Filter For Exhaust Gases, Rack Pinion, QBH Cable Entry For Laser Beam, Extended Protective Glass For Ray Efficiency, Colimation Module With Automatic Adjustment Of Focus Position, Enhanced Safety Cartridge Cover, Developed With Ceramic Adapter, Crust Reduction Control, Blow Piercing, Head Retraction Method, Lateral Air Blowing System, 3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC, Installation, Training (4 Days), #SMNFPRO315VENTO
http://www.sterlingmachinery.com/11308/Nukon+NF-PRO+315+Vento/
626-444-0311
Full Description
| Capacity: | 4000 Watts |
Cutting Capacities |
|
| Mild Steel: | .787″ |
| Stainless Steel: | .472″ |
| Aluminum: | .393″ |
| Copper: | .236″ |
| Brass: | .236″ |
| Laser Source IPG: | 100,000 Hours |
| Maximum Output: | 4,000 Watts |
| Output Stability: | +/- 2 Percent |
Pulse Mode |
|
| Frequency: | 5 – 2,000 Hz |
| Power: | 0-100 Percent |
| Laser Fiber Diameter: | 0.00393″ |
| Beam Mode: | Direct |
| Laser Safety: | Mechanical Safety Valve |
| Cooling Water Flow Rate: | 40 l/min |
| Maximum Worksheet Size: | 60″ x 120″ |
| Maximum Load Weight: | 2,200 Lbs. |
| Number of Controlled Axes: | 4 Axis (X,Y,W,Z) |
| Maximum Speed: | 4,724″/min |
| X-Axis: | 60.23″ |
| Y-Axis: | 120.078″ |
| Z-Axis: | 7.87″ |
Acceleration |
|
| X,Y,Z Axis with Servo Motor: | 1G |
| Positioning Accuracy: | +/-0.00060″/ft |
| Repeatability: | +/-0.000787″ |
| Pallet Changer Table & Cycle Time: | 2 pcs./ 45 Seconds |
Cutting Gases |
|
| Steel: | Oxygen (0.1 – 6 Bar) |
| Stainless Steel: | Nitrogen (0.2 – 20 Bar) |
| Aluminum: | Dry Air or Nitrogen (0.2 – 20 Bar) |
Cutting Head Features |
|
| CAD/CAM Software: | RANDAN/ LANTEK |
CNC Features |
|
| Name: | PA 8,000 |
| CNC Control Unit: | Intel Celeron 2 GHZ (Or Better) |
| Control of Operating System: | Advance Reader System |
| Controller Axis: | 4 Axis: Y(Y,W),X, Z |
| Minimum Value of The Correction: | 0.001 |
| Programming Version: | Code Program System & ISO/EIA |
Inputs |
|
| MDI Key Input | |
| Marking Device | |
| External Keyboard and Mouse | |
Input Ports |
|
| USB 2.0 x 4 Port | |
| Input/Output For Program | |
| Keyboard Connection | |
| Mouse Connection | |
| RS-232 Port (Maks.9600 bps) Optional | |
| 2 PS/2 Interface | |
| DNC for Interface | |
| Storage: | Hard Disk: 80 GB; Program Memory Capacity 20GB |
| Lan Port: | Lan Port (External Connection RJUS-10/100) |
| Display: | 19″ TFT, Touch Screen |
| Servo System: | Digital |
| Positioning: | Absolute Encoder |
| Parallel Port: | LPT |
Optical System |
|
| Focus Length: | 6″ |
Increment/Focus Length |
|
| BIMO-FSC Manual Focus Set Up: | .059″/6″ |
| BIMO-FSC Automatic Focus Length Set Up: | .059″/6″, .07″/7.8″ |
| BIMO-FSC Automatic Focus Length and Diameter Control: | .04″-.12″/6″, .062″-.16″/6″ |
| Maximum Laser Power: | 6000 Watts |
| Maximum Beam Parameter Acceptance (Half Angle) of Laser Light Exiting Fiber: | 97 Percent Power Content Within 125 MRAD |
| Wave Length: | 1,025 – 1,080 NM |
| Omission: | >97 Percent @ 1,064 NM |
| Diameter of The Fiber: | .0000393″ – .0393″ (Standard) |
| Laser Light Cable Receiver: | HIGHYAG LLK-HP (LLK-B), LLK-Auto (LLK-D), QBH |
Nozzle |
|
| Diameter: | 0.029″ – 0.11″ |
| X & Y Setting: | +/- 0.039″ |
Focus To Nozzle Position Range |
|
| BIMO-FSC With Motorized Z Focus Position: | 0.19″ In Head Direction – 0.19″ In Work Piece Direction |
Distance Measuring Module FJB |
|
| Calibration Range: | 0.0039″ – 0.787″ |
| Output Signal: | 0 – 10 V (Distance) |
| Response Time: | <1 msec |
Supply |
|
| Electricity: | DC 24V, 8 Amp, (BIMO-FSC With Motorized Z Focus Position and Diameter) |
| Pneumatic: | 0.2 MPa |
| Pressure Of The Gas: | Until 2.5 MPa |
| Gas: | Active Inert Gas |
| Cooling: | Flow Rate 2 l/min, Temperature 15-35 Degree Celsius |
| PLC/Field Bus System: | Hard Wired |
Cutting Head Dimensions |
|
| BIMO-FSC With Beam Bending Module 0 Degrees: | 5.3″ x 4.5″ x 17.3″ (WxDxH) |
| BIMO-FSC With Beam Bending Module 90 Degrees: | 13.4″ x 4.5″ x 15.3″ (WxDxH) |
| Weight: | 14 Lbs. |
| Horsepower: | 42 H.P. |
| Dimensions (L x W x H): | 28’1″ x 9’6″ x 7’5″ |
| Weight (Machine): | 34,170 Lbs. |
No comments yet.
Leave a comment
« 13″ x 17″ Brand New Hydmech Semi Automatic DOUBLE MITER SWIVEL HEAD Band Saw, Mdl. DM-1318P, Cast Iron Saw Head, Direct Blade Drive – No Belts, No Pulleys, Steel Base, On Demand Hydraulics, Digital Angle Display, Quick Release Hydraulic Cast Iron Vise on Linear Ways, Rotating Table with Cut Line, Gravity Head Feed, Mechanical Band Tensioning with Digital Readout, Safety Door Interlocks, Flood Coolant, Adjustable Guide Arm, Laser Light, Replaceable Blade Brush, #SMDM1318P | 20 ga Brand New Tin Knocker Letter Brake, Mdl. TK Letter Brake , Foot Operated, Clamping Leaves Both Hands Free, #SMTKLB »