July

29

157″ x 82″ x 39″ Brand New Atrump Vertical CNC Double Column Machining Center, Mdl. D2204, Fanuc Control System, Force Auto Lubrication System, Semi-Enclosed Splash Guard, Ship Augers at Both Sides, Crawler Chip Conveyor with Chip Bucket, Coolant Pump & Tank, Spindle Oil Cooler, Nitrogen Gas Counter Balancing System, Z Axis Hydraulic Counter Balancing System, Air System, Air Gun for Removing Chips, Halogen Work Light, Automatic Power Off Device, Program Finished Warning Lamp, RS-232 Interface, Leveling Bolts & Blocks, Service Tool, Operation & Maintenance Manual, Controller Operation Manual, Electric Circuit Drawing, Machine Accuracy Inspection Report, #SMD2204

157″ x 82″ x 39″ Brand New Atrump Vertical CNC Double Column Machining Center, Mdl. D2204, Fanuc Control System, Force Auto Lubrication System, Semi-Enclosed Splash Guard, Ship Augers at Both Sides, Crawler Chip Conveyor with Chip Bucket, Coolant Pump & Tank, Spindle Oil Cooler, Nitrogen Gas Counter Balancing System, Z Axis Hydraulic Counter Balancing System, Air System, Air Gun for Removing Chips, Halogen Work Light, Automatic Power Off Device, Program Finished Warning Lamp, RS-232 Interface, Leveling Bolts & Blocks, Service Tool, Operation & Maintenance Manual, Controller Operation Manual, Electric Circuit Drawing, Machine Accuracy Inspection Report, #SMD2204

626-444-0311

http://www.sterlingmachinery.com/12200/Atrump+D2204/

 

 

 

Specification
Full Description

Travel

X Axis: 157″
Y Axis: 82.6″
Z Axis: 39″

.

Table

Table Size: 70″ x 157″
T-Slot (Number/Size x Pitch): 9 / 0.8″ x 7.8″
Number of Linear Ways / Slide Blocks: 2 / 8
Max. Table Load: 26,400 lbs

.

Distance

Distance Between Columns: 86.6″
Distance from Spindle Nose to Table: 7.8″ x 47.2″

.

Spindle

Spindle Taper: #50, CAT50, BT50
Tool Changer: 24
Spindle Speed: 60 – 4500 rpm
Spindle Type: Gear Head
Spindle Diameter: 3.9″
Spindle Motor: 30 H.P.

.

Feed

3 Axes Servo Motors X/Y/Z: 9 H.P.
X, Y, & Z Axis Rapid Traverse Rate: 472 / 472 / 393 ipm
Cutting Feed Rate: 314 ipm

.

Accuracy

Positioning Accuracy: +/- 0.00039″/11.81″
Repeat Accuracy: +/- 0.00011″
Circular Accuracy: +/- 0.00078″

.

Horsepower: 30 H.P.
Voltage: 208V to 230V ~ 3 Phase

Dimensions (L x W x H)

Weight: 103,000 lbs
Equipped With

Fanuc Control System
Force Auto Lubrication System
Semi-Enclosed Splash Guard
Ship Augers at Both Sides
Crawler Chip Conveyor with Chip Bucket
Coolant Pump & Tank
Spindle Oil Cooler
Nitrogen Gas Counter Balancing System
Z Axis Hydraulic Counter Balancing System
Air System
Air Gun for Removing Chips
Halogen Work Light
Automatic Power Off Device
Program Finished Warning Lamp
RS-232 Interface
Leveling Bolts & Blocks
Service Tool
Operation & Maintenance Manual
Controller Operation Manual
Electric Circuit Drawing
Machine Accuracy Inspection Report

RSS Feed

No comments yet.

Leave a comment

« | »