July

29

43″ x 35″ x 27″ Brand New Atrump Horizontal Machining Center with Fanuc Oi-MD Control, Mdl. LH-117 Fanuc, Fanuc Oi-MD with 10.4″ LCD, 24 Tools Swing Arm ATC, 25 H.P. Spindle Motor, BT50 or CAT50, 4,500 rpm Spindle Speed, Heavy Duty 3 Axes Linear Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy/Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy/Repeatability, Anti-Flex Reinforced Base & Column, Telescopic Steel Way Covers on all 3 Axes, Built In Quartz Work Light, Coolant System, Air Blast System, Central Lubrication System, Bolster (Unclamp) Cylinder, Automatic Lubrication System, Spindle Chiller, Leveling Bolts & Pads, Chain Type Chip Conveyor, Air Gun & Spindle Air Blast, Alarm Light, Full Enclosure, Telescoping Way Cover, Work Light, Tool Box & Tools, Operation Manual, #SMLH117FANUC

43″ x 35″ x 27″ Brand New Atrump Horizontal Machining Center with Fanuc Oi-MD Control, Mdl. LH-117 Fanuc, Fanuc Oi-MD with 10.4″ LCD, 24 Tools Swing Arm ATC, 25 H.P. Spindle Motor, BT50 or CAT50, 4,500 rpm Spindle Speed, Heavy Duty 3 Axes Linear Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy/Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy/Repeatability, Anti-Flex Reinforced Base & Column, Telescopic Steel Way Covers on all 3 Axes, Built In Quartz Work Light, Coolant System, Air Blast System, Central Lubrication System, Bolster (Unclamp) Cylinder, Automatic Lubrication System, Spindle Chiller, Leveling Bolts & Pads, Chain Type Chip Conveyor, Air Gun & Spindle Air Blast, Alarm Light, Full Enclosure, Telescoping Way Cover, Work Light, Tool Box & Tools, Operation Manual, #SMLH117FANUC

626-444-0311

http://www.sterlingmachinery.com/12202/Atrump+LH-117+Fanuc/

 

Specification
Full Description
Table Size: 27.6″ x 49.6″
Load Capacity: 1,320 Lbs.
Longitudinal Travel: 43.3″
Cross Travel: 35.4″
Vertical Head Travel: 27.6″
Spindle Nose To Table Top: 4.6″ – 32.3″
Spindle Nose to Table Center: 7.8″ – 43.3″
Spindle Taper: CAT50/BT50
Spindle Speed: 4,500 RPM

.

Feed Rates

Rapid Feed Rate: X: 700 IPM AC, Z: 700 IPM AC, Y: 400 IPM
Cutting Feed Rate: 1 – 360 IPM

.

CNC Axis: 3
Controller: Centroid

.

Automatic Tool Changer

Number Of Tool Stations: 24 Arm Type
Max. Tool Diameter: 3.5″
Max. Tool Weight: 30 Lbs.

.

Oil Types

Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2

.

Coolant Capacity: 36 Gallons

.

Horsepower: 25 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (W x D x H): 117″ x 136″ x 113″
Weight: 14,200 Lbs.
Equipped With

Fanuc Oi-MD with 10.4″ LCD
24 Tools Swing Arm ATC
25 H.P. Spindle Motor
BT50 or CAT50
4,500 rpm Spindle Speed
Heavy Duty 3 Axes Linear Guide Way
Double Nut Precision Ball Screws Hardened & Ground for High Accuracy/Long Lasting
FC30 Meehanite Casting Main Frame
100% Laser Tested for Positioning Accuracy/Repeatability
Anti-Flex Reinforced Base & Column
Telescopic Steel Way Covers on all 3 Axes
Built In Quartz Work Light
Coolant System
Air Blast System
Central Lubrication System
Bolster (Unclamp) Cylinder
Automatic Lubrication System
Spindle Chiller
Leveling Bolts & Pads
Chain Type Chip Conveyor
Air Gun & Spindle Air Blast
Alarm Light
Full Enclosure
Telescoping Way Cover
Work Light
Tool Box & Tools
Operation Manual

 

RSS Feed

No comments yet.

Leave a comment

« | »