August

30

95 ton x 12′ Brand New Betenbender Hydraulic Press Brake, Mdl. 12′-95, 3 Speed RAM, Clamp Type Backgauge-Manual Adjustable X, Y, & Z., All Steel Construction, Disconnect Switch, Bottom Time Delay, Depth Stop WIth Digital Readout, Three Position Foot Pedal, NEMA Electrics, Hour Meter, Cylinders are Steel, Double Acting Piston Type with Hardened, Ground and Chromed Rods, Front & Back of Bed Machined Smooth for Mounting of Gauges, Hardened Pins with Spherical Bearings for Alignment, American Made Hoses, Fittings, Valves, And Motors, #SM1295

95 ton x 12′ Brand New Betenbender Hydraulic Press Brake, Mdl. 12′-95, 3 Speed RAM, Clamp Type Backgauge-Manual Adjustable X, Y, & Z., All Steel Construction, Disconnect Switch, Bottom Time Delay, Depth Stop WIth Digital Readout, Three Position Foot Pedal, NEMA Electrics, Hour Meter, Cylinders are Steel, Double Acting Piston Type with Hardened, Ground and Chromed Rods, Front & Back of Bed Machined Smooth for Mounting of Gauges, Hardened Pins with Spherical Bearings for Alignment, American Made Hoses, Fittings, Valves, And Motors, #SM1295

626-444-0311

http://www.sterlingmachinery.com/12269/Betenbender+12′-95/

Specification
Full Description
Capacity: 95 Ton x 12′
Tonnage: 95
Length of Bed & Ram: 144″
Distance Between Housings:: 126-1/2″
Throat: 8″
Type: Hydraulic
Stroke: 8″
Open Height: 14″
Closed Height: 6″
Ram Speed: Approach: 114 IPM
Ram Speed: Return: 168 IPM
Ram Speed: Press: 50 IPM
Backgauge: Yes
Safety Curtains: No
Horsepower: 20 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x Dx H): 160″ x 57″ x 103″
Weight: 26,000 Lbs.
Equipped With

3 Speed RAM
Clamp Type Backgauge-Manual Adjustable X, Y, & Z.
All Steel Construction
Disconnect Switch
Bottom Time Delay
Depth Stop WIth Digital Readout
Three Position Foot Pedal
NEMA Electrics
Hour Meter
Cylinders are Steel, Double Acting Piston Type with Hardened, Ground and Chromed Rods
Front & Back of Bed Machined Smooth for Mounting of Gauges
Hardened Pins with Spherical Bearings for Alignment
American Made Hoses, Fittings, Valves, And Motors

RSS Feed

No comments yet.

Leave a comment

« | »