October

4

12″ x 24″ Brand New SuperTec Universal Cylindrical Grinder, Mdl. G32P-60M, 7.5 H.P. Spindle Motor on Wheelhead, Grinding Wheel with Flange, Table Dial Guage, Cartridge Type Spindle on Wheelhead, Carbide Tip Centers, Splash Guard, Leveling Screws with Blocks, Balancing Arbor, Diamond Dresser (fixed on table), Wheel Extractor, Automatic Lubrication System, Coolant System, One V & One Flat Guideway on Wheelhead, Swivel Table with Dial Indicator, Tool Box with Adjusting Tools, Operation Manual with Parts List, #SMG32P60M

12″ x 24″ Brand New SuperTec Universal Cylindrical Grinder,

12″ x 24″ Brand New SuperTec Universal Cylindrical Grinder, Mdl. G32P-60M, 7.5 H.P. Spindle Motor on Wheelhead, Grinding Wheel with Flange, Table Dial Guage, Cartridge Type Spindle on Wheelhead, Carbide Tip Centers, Splash Guard, Leveling Screws with Blocks, Balancing Arbor, Diamond Dresser (fixed on table), Wheel Extractor, Automatic Lubrication System, Coolant System, One V & One Flat Guideway on Wheelhead, Swivel Table with Dial Indicator, Tool Box with Adjusting Tools, Operation Manual with Parts List, #SMG32P60M

626-444-0311

http://www.sterlingmachinery.com/12084/Supertec+G32P-60M/

Specification

Full Description

Capacity

Distance Between Centers: 24″
Swing Over Table: 12.6″
Max. Grinding Diameter: 12″
Max. Load Held Between Centers: 330 lbs

.

Wheel Head

Hand Feed Travel: 7.8″
Hand Wheel per Division: 0.0002″
Hand Wheel per Revolution: 0.08″
Infeed Travel: 9.6″
Swivel Angle: +/- 30°
Automatic Rapid Travel: 1.75″

.

Grinding Wheel

Diameter x Width x Bore: 16″ x 2″ x 5″
Grinding Wheel Speed: 1650 RPM

.

Table

Swivel Angle: +/- 9°
Traverse Speed: 1.2″ ~ 275″/minute
Hand Wheel per Revolution: 0.39″

.

Work Head

Swivel Angle: 90°
Center Taper: MT 4
Spindle Speed: 30 ~ 350 RPM

.

Tailstock

Center Taper: MT 4
Quill Travel: 1″

.

Internal Grinding Spindle

Spindle Speed: 12,000 RPM
Max. Grinding Bore: 4.33″ or 2.17″
Max. Chucking Length: 8″ ~ 12.4″
Max. Chucking Diameter: 6″

.

Horsepower/Motor

Wheel Spindle: 7.5 H.P.
Work Head: 2 H.P.
Hydraulic Pump: 2 H.P.
Coolant Pump: 0.25 H.P.
Internal Grinder: 2 H.P.

.

Dimensions (L x W x H): 119″ x 90″ x 79″
Weight: 9460 lbs
Equipped With

7.5 H.P. Spindle Motor on Wheelhead
Grinding Wheel with Flange
Table Dial Guage
Cartridge Type Spindle on Wheelhead
Carbide Tip Centers
Splash Guard
Leveling Screws with Blocks
Balancing Arbor
Diamond Dresser (fixed on table)
Wheel Extractor
Automatic Lubrication System
Coolant System
One V & One Flat Guideway on Wheelhead
Swivel Table with Dial Indicator
Tool Box with Adjusting Tools
Operation Manual with Parts List

RSS Feed

No comments yet.

Leave a comment

« | »