October

11

8″ x 16″ Used SuperTec Automatic Universal NC Cylindrical Grinder “Like New Condition”, Mdl. G20P-50NC, Mitsubishi Touch Screen NC Control, Auto Lubrication, Balancing Arbor, Grinding Wheel, Wheel Extractor, Halogen Light, Splash Guard, Coolant System, Carbide Tip Centers, Leveling Screws with Blocks, Tail Stock, Motorized Workhead, Manual, Traverse and Plunge Operation, Year (2008) #A3908

8″ x 16″ Used SuperTec Automatic Universal NC Cylindrical Grinder “Like New Condition”, Mdl. G20P-50NC, Mitsubishi Touch Screen NC Control, Auto Lubrication, Balancing Arbor, Grinding Wheel, Wheel Extractor, Halogen Light, Splash Guard, Coolant System, Carbide Tip Centers, Leveling Screws with Blocks, Tail Stock, Motorized Workhead, Manual, Traverse and Plunge Operation, Year (2008) #A3908

626-444-0311

http://www.sterlingmachinery.com/10739/Supertec+G20P-50NC/

Specification
Full Description
Capacity: 8″ x 16″
Swing Over Table: 8″
Distance Between Centers: 16″
Max. Grinding Diameter: 8″
Max. Load Held Between Centers: 110 Lbs.

Grinding Wheel

Diameter x Width x Bore: 14″ x 1″ – 1/2″ x 5″
Grinding Wheel Speed: 1960 RPM

Wheel Head

Swivel Angle: Fixed
Automatic Infeed Increment: 0.0001″ – 0.0999″
Infeed Travel: 6-1/3″
Hand Feed Travel: 6-1/3″
Hand Wheel per Graduation: 0.0002″
Hand Wheel per Revolution: 0.1″

Work Head

Swivel Angle: +/- 45°
Center Taper: MT 3
Spindle Speed: 150/264/356/483
Spindle Type: Live & Dead

Tail Stock

Center Taper: MT 3
Quill Travel: 1″

Table

Swivel Angle: +/- 8°
Traverse Speed: 3″ – 5.5″ – 9″/min
Hand Wheel per Revolution: .35″

Internal Grinder

Spindle Speed: 14,000 RPM
Max. Grinding Bore: .95″ – 2.76″
Max. Grinding Length: 10-3/4″
Max. Chuck Diameter: 4-1/3″

Horsepower

Wheel Spindle: 5 H.P
Work Head: 1/2″
Coolant: 1/8″
Internal Grinder: 1/2″

Voltage

Dimensions (L x W x H): 85″ x 54″ x 73″
Weight: 4,800 Lbs.
Equipped With

Mitsubishi Touch Screen NC Control
Auto Lubrication
Balancing Arbor
Grinding Wheel
Wheel Extractor
Halogen Light
Splash Guard
Coolant System
Carbide Tip Centers
Leveling Screws with Blocks
Tail Stock
Motorized Workhead
Manual, Traverse and Plunge Operation

RSS Feed

No comments yet.

Leave a comment

« | »