October

13

14″ x 40″ Brand New Racer Standard Modern Manual Engine Lathe, Mdl. 1440, 3 H.P. Continuous Duty, 40″ Between Centers, D1-4″ Camlock – 3 Bearing Spindle, Camlock Dog Plate Assembly, Headstock/Tailstock Center #3 Morse Taper, Reduction Sleeve #5 to #3 Morse Taper, Speed Range 40 – 2000 RPM, Hardened & Ground Bed Ways, Electric Brake, Spare Shear Pins & Keys, Standard Open Drip Proof Motor, Camlock Wrench, Inch/Metric Feed Box, Switchable, Tool Post Wrench 1/2″ Square Opening/Swivel Base Wrench 3/4″ Opening, Swivel Base Wrench 3/4″ Opening, Splash Guard, Power Meter, CSA Approved Electrical, Operations Manual (Instructions & Spare Parts), MADE IN NORTH AMERICA, #SM1440

14″ x 40″ Brand New Racer Standard Modern Manual Engine Lathe,

14″ x 40″ Brand New Racer Standard Modern Manual Engine Lathe, Mdl. 1440, 3 H.P. Continuous Duty, 40″ Between Centers, D1-4″ Camlock – 3 Bearing Spindle, Camlock Dog Plate Assembly, Headstock/Tailstock Center #3 Morse Taper, Reduction Sleeve #5 to #3 Morse Taper, Speed Range 40 – 2000 RPM, Hardened & Ground Bed Ways, Electric Brake, Spare Shear Pins & Keys, Standard Open Drip Proof Motor, Camlock Wrench, Inch/Metric Feed Box, Switchable, Tool Post Wrench 1/2″ Square Opening/Swivel Base Wrench 3/4″ Opening, Swivel Base Wrench 3/4″ Opening, Splash Guard, Power Meter, CSA Approved Electrical, Operations Manual (Instructions & Spare Parts), MADE IN NORTH AMERICA, #SM1440

626-444-0311

http://www.sterlingmachinery.com/12369/Racer+Machinery+International+Inc.++1440/

Specification
Full Description
Overall Capacity: 14″ x 40″
Operation Type: Manual

.

Swing Over Bed & Saddle Wings: 14″
Swing Over Cross Slide: 7-3/4″
Distance Between Centers: 40″

.

Headstock

Spindle Speeds: 12
Speed Range: 40 – 2000 RPM
Spindle Nose – Camlock: D1 – 4″
Spindle Through Hole: 1-3/8″ diameter
Spindle Nose Taper: #5 MT
Spindle Center: #3 MT

.

Feedbox

Feed & Thread Selections: 54
Range of Threads: 4 – 224 TPI
Feed Rates : 0.001″ – 0.062″ long
0.0005″ – 0.031″ cross
Lead Screw: 1″ dia. x 6 TPI Acme
Feedshaft: 9/16″ Hex.

.

Bed

Width at Top: 8-1/2″
Depth: 8″
Width of Front Saddle Guide Vee: 1″

.

Tailstock

Spindle Diameter & Length: 1-9/16″ dia. x 8″
Spindle Travel: 4″
Length of Graduations: 3″
Spindle Taper Hole: #3 MT
Set Over Each Side of Center: 3/4″

.

Saddle

Length of Ways: 15″
Width of Bridge: 6″
Cross Slide Travel: 7″
Compound Slide Travel: 3-1/4″
Tool Holder – Shank Size: 1/2″ x 1-1/8″

.

Apron

Threading & Feed Levers Interlocked Against Simultaneous Engagement
Anti-Friction Bearings on Rack Pinion & Hand Wheel Shafts
Single Lever Operates Longitudinal & Cross Feed
Double Walled – Fully Lubricated
Threading Lever Convenient to Threading Dial
Double Half Nuts

.

Warranty: 2 Year Limited Warranty
Horsepower: 3 H.P.

Voltage

Dimensions (L x W x H): 77″ x 34″ x 56″
Weight: 1750 lbs
Equipped With

3 H.P. Continuous Duty
40″ Between Centers
D1-4″ Camlock – 3 Bearing Spindle
Camlock Dog Plate Assembly
Headstock/Tailstock Center #3 Morse Taper
Reduction Sleeve #5 to #3 Morse Taper
Speed Range 40 – 2000 RPM
Hardened & Ground Bed Ways
Electric Brake
Spare Shear Pins & Keys
Standard Open Drip Proof Motor
Camlock Wrench
Inch/Metric Feed Box, Switchable
Tool Post Wrench 1/2″ Square Opening/Swivel Base Wrench 3/4″ Opening
Swivel Base Wrench 3/4″ Opening
Splash Guard
Power Meter
CSA Approved Electrical
Operations Manual (Instructions & Spare Parts)
MADE IN NORTH AMERICA

RSS Feed

No comments yet.

Leave a comment

« | »