October

13

20″ x 60″ Brand New Racer Standard Modern Manual Engine Lathe, Mdl. 2060, 15 H.P. Continuous Duty, D1-8″ Camlock – 3 Bearing Spindle, 18 Spindle Speeds 27 – 1600 RPM, Electric Brake – Self Actuating, All Hardened & Ground Gears – No Clutches, Direct Reading Speed Dial, Convenient Hi-Lo Neutral Shifter, Wrenches, Keys, Spare Shear Pins, No Transposing Gears, Complete Range of Inch-Metric Threads (Switchable), Feed Reverse & Lead Screw Reverse, Full Length Rear Splash Guard, Bi-Direction Auto Carriage Stop (Feeds & Threads), Hardened Quill with Tang Drive, Deep Bed Design, Super Stiff Bed – Ready for Future Tools, Chip Clean Out – Front & Rear, Standard 115V Electric Controls, Operation Manual, MADE IN NORTH AMERICA, #SM2060

20″ x 60″ Brand New Racer Standard Modern Manual Engine Lathe, Mdl. 2060, 15 H.P. Continuous Duty, D1-8″ Camlock – 3 Bearing Spindle, 18 Spindle Speeds 27 – 1600 RPM, Electric Brake – Self Actuating, All Hardened & Ground Gears – No Clutches, Direct Reading Speed Dial, Convenient Hi-Lo Neutral Shifter, Wrenches, Keys, Spare Shear Pins, No Transposing Gears, Complete Range of Inch-Metric Threads (Switchable), Feed Reverse & Lead Screw Reverse, Full Length Rear Splash Guard, Bi-Direction Auto Carriage Stop (Feeds & Threads), Hardened Quill with Tang Drive, Deep Bed Design, Super Stiff Bed – Ready for Future Tools, Chip Clean Out – Front & Rear, Standard 115V Electric Controls, Operation Manual, MADE IN NORTH AMERICA, #SM2060

626-444-0311

http://www.sterlingmachinery.com/12365/Racer+Machinery+International+Inc.++2060/

Specification
Full Description
Overall Capacity: 20″ x 60″
Operation Type: Manual

.

Swing Over Bed: 22″
Swing Over Bed & Saddle: 20″
Swing Over Cross Slide: 12″
Distance Between Centers: 60″
Bar Capacity: 3″

.

Headstock

Spindle Speeds: 18
Speed Range: 27 – 1600 RPM
Spindle Nose – Camlock: D1 – 8″
Spindle Hole: 3.06″
Spindle Center: #5 MT

.

Feedbox

Feed & Thread Selections: 66
Inch Feed Range: 0.0015″ – 0.105″ /rev.
Inch Thread Range: 2 to 127 TPI
Metric Feed Range: 0.04mm – 2.67mm /rev.
Metric Thread Range: 0.2mm to 14mm

.

Tailstock

Quill Diameter: 2.94″
Quill Travel: 8″
Morse Taper with Tang: #5 MT
Off Set: 75″

.

Carriage Cross Slide

Carriage Length on Bed : 21″
Carriage Bridge Width: 10″
Cross Slide Length: 24″
Cross Slide Travel: 12″
Compound Travel: 5″
Direct Reading Dial Graduation: 0.001″

.

Bed & Base

Bed Width: 14″
Bed Depth: 12-1/2″
Bed Length: 104″
Base Width: 30″
Base Length: 114″

.

Apron

Hand Wheel – 1 Revolution: 1″
Half Nuts: Double
High Speed Threading : to 800 RPM
Repeatability of Auto Carriage Stop: +/- 0.005″
Feed Torque Control : Variable

.

Warranty: 2 Year Limited Warranty
Horsepower: 15 H.P.
Voltage: 208/230/460/575V ~ 3 Phase
Dimensions (L x W x H): 126″ x 56″ x 65″
Weight: 5100 lbs
Equipped With

15 H.P. Continuous Duty
D1-8″ Camlock – 3 Bearing Spindle
18 Spindle Speeds 27 – 1600 RPM
Electric Brake – Self Actuating
All Hardened & Ground Gears – No Clutches
Direct Reading Speed Dial
Convenient Hi-Lo Neutral Shifter
Wrenches, Keys, Spare Shear Pins
No Transposing Gears
Complete Range of Inch-Metric Threads (Switchable)
Feed Reverse & Lead Screw Reverse
Full Length Rear Splash Guard
Bi-Direction Auto Carriage Stop (Feeds & Threads)
Hardened Quill with Tang Drive
Deep Bed Design
Super Stiff Bed – Ready for Future Tools
Chip Clean Out – Front & Rear
Standard 115V Electric Controls
Operation Manual
MADE IN NORTH AMERICA

RSS Feed

No comments yet.

Leave a comment

« | »