October

19

12″ x 60″ Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 4VK NC Inverter 2+1, Centroid M400i Control with 15″ Color LCD, 5 H.P. Spindle Motor, #40 Spindle Taper, Programmable 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Auto Lubrication System, Built-In Quartz Work Light, Hard Limit Switch, 2-Axis or 3rd Axis Simultaneous, One Shot Lubrication System, USB 2.0 Port, Lamp, Chip Tray, Coolant System, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manual, #SM4VKNC

12″ x 60″ Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 4VK NC Inverter 2+1, Centroid M400i Control with 15″ Color LCD, 5 H.P. Spindle Motor, #40 Spindle Taper, Programmable 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Auto Lubrication System, Built-In Quartz Work Light, Hard Limit Switch, 2-Axis or 3rd Axis Simultaneous, One Shot Lubrication System, USB 2.0 Port, Lamp, Chip Tray, Coolant System, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manual, #SM4VKNC

626-444-0311

http://www.sterlingmachinery.com/11539/Atrump+4VK+NC+Inverter+2+1/

Specification

Full Description
Table: 12″ x 60″
Longitudinal Travel: 38″
Cross Travel: 16.5″
Quill Travel (Z Axis): 5″ Manual, 4.5″ CNC
Knee Travel (Manual): 16.5″
Quill Diameter: 4″
Spindle Nose To Table Top: 2-1/4″ to 21-3/4″
Load Capacity: 1000 lbs
Spindle Taper: #40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission Of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8″ to 27″

.

Head

Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees

.

Motor

Spindle Motor: 5 H.P.
KVA Rating : 4KVA, 18 Amps
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: Automatic
Warranty: One Year Limited Warranty
Power Requirement: 5 H.P., 3 Phase 208V to 230V (Max)

.

Dimensions (L x W x H): 124″ x 75″ x 92″
Weight: 4300 lbs
Equipped With

Centroid M400i Control with 15″ Color LCD
5 H.P. Spindle Motor, #40 Spindle Taper
Programmable 4000 rpm Spindle Speed with Hi/Lo Gear
Hardened & Ground with Turcite-B Coating Guide Way
Precision Ballscrews for High Accuracy & Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Anti-Rust Chrome Quill
Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability
Standard Way Covers on All Three Axes
Auto Lubrication System
Built-In Quartz Work Light
Hard Limit Switch
2-Axis or 3rd Axis Simultaneous
One Shot Lubrication System
USB 2.0 Port
Lamp
Chip Tray
Coolant System
RS-232 Interface
60 GB Solid State Hard Drive
Shop Floor Programming/ Conversational
Tool Box W/Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »