October

19

10″ x 54″ Brand New Atrump CNC Knee Milling Machine with Rigid Head & Moveable RAM, Mdl. 3VK Inverter Rigid Head with Moveable RAM, Centroid M400i Control with 15″ Color LCD, 3 Axis Control, 3 H.P. Spindle Motor, R8 Spindle Taper, Programmable 50 to 5000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Moveable Arm with CNC Head Stock, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Standard Way Covers on All Three Axes, Built-In Quartz Work Light, Hard Limit Switch, MPG Hand Wheel Mounted on Head, USB 2.0 Port, Leveling Bolts & Plate, Chip Tray, Coolant System, Auto Lubrication System, On Shot Lube System, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manual, #SM3VKMR

626-444-0311

http://www.sterlingmachinery.com/11537/Atrump+3VK+Inverter+Rigid+Head+with+Moveable+RAM/

Specification

Full Description
Table: 10″ x 54″
Logitudinal Travel: 31″
Cross Travel: 14-1/2″
Quill Travel (Z Axis): 4.5″
Knee Travel (Manual): 16″
Quill Diameter: 3 3/8″
Spindle Nose to Table Top: 3/4″ to 16-3/4″
Load Capacity: 600 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8″ to 23-1/2″

.

Motor

Spindle Motor: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: Automatic
Coolant Tank Capacity: 7 Gallons
Power Requirements : 5 H.P., 3 Phase 208V to 230V (Max)

.

Warranty: One Year Limited Warranty
Dimensions (L x W x H): 108″ x 77″ x 92″
Weight: 3100 lbs
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Equipped With

Centroid M400i Control with 15″ Color LCD
3 Axis Control
3 H.P. Spindle Motor, R8 Spindle Taper
Programmable 50 to 5000 rpm Spindle Speed
Hardened & Ground with Turcite-B Coating Guide Way
Precision Ballscrews for High Accuracy & Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Anti-Rust Chrome Quill
Moveable Arm with CNC Head Stock
Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability
Standard Way Covers on All Three Axes
Built-In Quartz Work Light
Hard Limit Switch
MPG Hand Wheel Mounted on Head
USB 2.0 Port
Leveling Bolts & Plate
Chip Tray
Coolant System
Auto Lubrication System
On Shot Lube System
RS-232 Interface
60 GB Solid State Hard Drive
Shop Floor Programming/ Conversational
Tool Box W/Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »