October

20

10″ x 54″ Brand New Atrump CNC with 3 Axis Bed Mill, Mdl. A2-7H, Centroid M400i Control with 15″ Color LCD, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Tool Box W/Tools, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Operation Manuals, #SMA27H

10″ x 54″ Brand New Atrump CNC with 3 Axis Bed Mill, Mdl. A2-7H, Centroid M400i Control with 15″ Color LCD, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Tool Box W/Tools, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Operation Manuals, #SMA27H

626-444-0311

http://www.sterlingmachinery.com/11521/Atrump+A2-7H/

Specification
Full Description
Table: 10″ x 54″
Longitudinal Travel: 33.8″
Cross Travel: 19.6″
Vertical Travel: 25.1″
Saddle Size: 20.07″
Spindle Nose to Table Top: 3.93″ to 29.13″
Spindle Taper: CAT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62″ x 3″ x 2.55″
Transmission Of Spindle & Motor: Belt

.

Feed Rate

Rapid Feed Rate: X/Y/Z: 240 ipm AC
Cutting Feed Rate: 1 to 120 ipm

.

Motor

Spindle Motor/Max Torque: 7.5 H.P.
Servo Motors on XYZ: 1 kW – AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150W

.

Automatic Tool Changer

Maximum Tool Diameter: 3.5″
Maximum Tool Weight: 15 lbs

.

Warranty: One Year Limited Warranty
Horsepower: 18 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 115.6″ x 82.7″ x 101.6″
Weight: 4600 lbs
Equipped With

Centroid M400i Control with 15″ Color LCD
Hardened & Ground with Turcite-B Coating Guide Way
Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
100% Laser Tested for Positioning Accuracy & Repeatability
Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability
Standard Way Covers on All Three Axes
Tool Box W/Tools
Coolant System
Central Lubrication System
Built-In Quartz Work Light
Leveling Bolts & Plate
Splash Guard
60 GB Solid State Hard Drive
RS-232 Interface
USB 2.0 Port
Shop Floor Programming/ Conversational
Operation Manuals

RSS Feed

No comments yet.

Leave a comment

« | »