October

20

12″ x 60″ Brand New Atrump Vertical 3 Axis Manual Knee Mill, Mdl. AONE4VK, 5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, 3900 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Power Knee, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4VK

12″ x 60″ Brand New Atrump Vertical 3 Axis Manual Knee Mill, Mdl. AONE4VK, 5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, 3900 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Power Knee, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4VK

626-444-0311

http://www.sterlingmachinery.com/11509/Atrump+AONE4VK/

Specification

Full Description
Capacity: 12″ x 60″

.

Table: 12″ x 60″
Logitudinal Travel: 40″
Cross Travel: 17″
Quill Travel: 5″
Knee Travel: 16-5/8″
Quill Diameter: 3.94″
Spindle Nose to Table Top: 2-1/4″ to 21-7/8″
Load Capacity: 900 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 3900 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8″ to 23-1/4″
Ram Travel: 20″

.

Head

Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees

.

Warranty: One Year Limited Warranty

Motor

Spindle Motor: 5 H.P.
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic
Power Requirements : 6.5 KVA, 3 Phase, 208V to 230V (Max)

.

Dimensions (L x W x H): 114″ x 71″ x 90″
Weight: 4300 lbs
Equipped With

5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper
3900 rpm Spindle Speed with Hi/Lo Gear
Hardened & Ground with Turcite-B coating Guide Way
C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″
Draw Bar
Coolant System
Auto Lubrication System
Chip Tray
Leveling Bolts & Plate
Halogen Work Light
Power Knee
Heavy Duty Square Slideway on Y & Z Axis
Anti-Rust Chrome Quill
Standard Way Covers on all 3 Axis
Tools & Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »