October

20

12″ x 60″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE4EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Hardened & Ground with Turcite-B coating Guide Way, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Power Knee, Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4EV

12″ x 60″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE4EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Hardened & Ground with Turcite-B coating Guide Way, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Power Knee, Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4EV

626-444-0311

http://www.sterlingmachinery.com/11508/Atrump+AONE4EV/

Specification

Full Description
Capacity: 12″ x 60″

.

Table: 12″ x 60″
Logitudinal Travel: 40″
Cross Travel: 17″
Knee Travel: 16-5/8″
Quill Travel: 5″
Quill Diameter: 3.94″
Spindle Nose to Table Top: 2-1/4″ to 21-7/8″
Load Capacity: 900 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8″ to 23-1/4″
Ram Travel: 20″

.

Head

Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees

.

Motor

Spindle Motor: 5 H.P. (max torque)
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic

.

Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 114″ x 71″ x 90″
Weight: 4300 lbs
Equipped With

Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter
NST40/NMTB40 Spindle Taper
Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear
C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Hardened & Ground with Turcite-B coating Guide Way
Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″
Power Knee
Draw Bar
Coolant System
Auto Lubrication System
Chip Tray
Leveling Bolts & Plate
Halogen Work Light
Heavy Duty Square Slideway on Y & Z Axis
Anti-Rust Chrome Quill
Standard Way Covers on all 3 Axis
Tools & Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »