October

20

12″ x 60″ Brand New Atrump Vertical Variable Speed Manual Knee Mill, Mdl. AONE5EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Heavy Duty Square Slideway on Y & Z Axis, Power Knee, Draw Bar, Built-In Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Halogen Work Light, Tools & Box, Operation Manual, #SMAONE5EV

12″ x 60″ Brand New Atrump Vertical Variable Speed Manual Knee Mill, Mdl. AONE5EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Heavy Duty Square Slideway on Y & Z Axis, Power Knee, Draw Bar, Built-In Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Halogen Work Light, Tools & Box, Operation Manual, #SMAONE5EV

626-444-0311

http://www.sterlingmachinery.com/11510/Atrump+AONE5EV/

Specification

Full Description
Capacity: 12″ x 60″

.

Table: 12″ x 60″
Logitudinal Travel: 40″
Cross Travel: 17″
Knee Travel: 16-5/8″
Quill Travel: 5.5″
Quill Diameter: 4.13″
Spindle Nose to Table Top: 2-1/4″ to 21-7/8″
Load Capacity: 990 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8″ to 23-1/4″
Ram Travel: 20″

.

Motor

Spindle Motor: 5 H.P.
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic

.

Warranty: One Year Limited Warranty
Horsepower: 8 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 114″ x 71″ x 90″
Weight: 4300 lbs
Equipped With

Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter
NST40/NMTB40 Spindle Taper
Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear
Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″
Hardened & Ground with Turcite-B coating Guide Way
C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Heavy Duty Square Slideway on Y & Z Axis
Power Knee
Draw Bar
Built-In Coolant System
Auto Lubrication System
Chip Tray
Leveling Bolts & Plate
Anti-Rust Chrome Quill
Standard Way Covers on all 3 Axis
Halogen Work Light
Tools & Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »