October

20

14″ x 54″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE7EV, Electronic Variable Speed 7.5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Draw Bar, Auto Lubrication System, Built-In Coolant System, Power Knee, Built-In Quartz Work Light, Gear Type Power Feed X Axis, Gear Type Power Feed Y Axis, Chip Tray, Leveling Bolts & Plate, Way Cover, Tools & Box, Operation Manual, #SMAONE7EV

14″ x 54″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE7EV, Electronic Variable Speed 7.5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Draw Bar, Auto Lubrication System, Built-In Coolant System, Power Knee, Built-In Quartz Work Light, Gear Type Power Feed X Axis, Gear Type Power Feed Y Axis, Chip Tray, Leveling Bolts & Plate, Way Cover, Tools & Box, Operation Manual, #SMAONE7EV

626-444-0311

http://www.sterlingmachinery.com/11512/Atrump+AONE7EV/

Specification

Full Description
Capacity: 14″ x 54″

.

Table: 14″ x 54″
Logitudinal Travel: 33.5″
Cross Travel: 19.7″
Knee Travel: 23.6″
Quill Diameter: 4.13″
Quill Travel: 6″
Spindle Nose to Table Top: 11-1/4″ to 27″
Load Capacity: N/A
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Ram Travel: 24″

.

Motor

Spindle Motor: 7.5 H.P.
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic

.

Warranty: One Year Limited Warranty
Horsepower: 8 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 78.7″ x 68.9″ x 104.3″
Weight: 6600 lbs
Equipped With

Electronic Variable Speed 7.5 H.P. Spindle Motor
NST40/NMTB40 Spindle Taper
Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear
Hardened & Ground with Turcite-B coating Guide Way
C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″
Heavy Duty Square Slideway on Y & Z Axis
Anti-Rust Chrome Quill
Draw Bar
Auto Lubrication System
Built-In Coolant System
Power Knee
Built-In Quartz Work Light
Gear Type Power Feed X Axis
Gear Type Power Feed Y Axis
Chip Tray
Leveling Bolts & Plate
Way Cover
Tools & Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »