October

21

13″ x 9″ x 11″ Brand New Atrump Space Saver Plus Vertical CNC Machining Center, Mdl. Space Saver Plus VM-350, Centroid M400i Control with 15″ LCD, 8 Tools ATC Armless, 3 H.P. Spindle Motor, BT30 Spindle Taper, 10,000 rpm Spindle Speed, 3 Axes Linear Guide Way, Precision Ball Screws for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Enclosure, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMSPACESAVERPLUSVM350

13″ x 9″ x 11″ Brand New Atrump Space Saver Plus Vertical CNC Machining Center, Mdl. Space Saver Plus VM-350, Centroid M400i Control with 15″ LCD, 8 Tools ATC Armless, 3 H.P. Spindle Motor, BT30 Spindle Taper, 10,000 rpm Spindle Speed, 3 Axes Linear Guide Way, Precision Ball Screws for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Enclosure, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMSPACESAVERPLUSVM350

626-444-0311

http://www.sterlingmachinery.com/11639/Atrump+Space+Saver+Plus+VM-350/

Specification
Full Description

Basic Dimensions

Table: 15.7″ x 9.8″
Longitudinal Travel: 13.7″
Cross Travel: 9.8″
Vertical Travel: 11.8″
Spindle Nose To Table Top: 2.7″ to 14.5″
Load Capacity: 140 lbs
Spindle Taper & Pull Force: BT 30
300 kgs
Spindle Speed: 10,000 rpm
Transmission of Spindle & Motor: Belts

Spindle Center to Column Front Surface

.

Feed Rate: X/Y: 400 ipm
Z: 400 ipm
Cutting Feed Rate: 1 to 100 ipm

.

Motor

Spindle Motor: 3 H.P.
Feed Motors on XYZ: 0.75/0.75/1 kW
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150W

.

Automatic Tool Changer

Number of Tools: 8
Max. Tool Diameter: 2″
Max. Tool Weight: 10 lbs

.

Coolant Tank Capacity : 12 Gallons
Air Requirement: 90 – 100 psi

.

Warranty: 1 Year Limited Warranty
Horsepower: 13 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 63″ x 51″ x 74″
Weight: 2640 lbs
Equipped With

Centroid M400i Control with 15″ LCD
8 Tools ATC Armless
3 H.P. Spindle Motor, BT30 Spindle Taper
10,000 rpm Spindle Speed
3 Axes Linear Guide Way
Precision Ball Screws for High Accuracy & Long Lasting
FC30 Meehanite Casting Main Frame
100% Laser Tested for Positioning Accuracy & Repeatability
Telescopic Steel Way Covers on all Three Axes
Coolant System
Air Blast System
Central Lubrication System
Built In Quartz Work Light
Leveling Bolts & Plate
Full Enclosure
Air Blast & Coolant Flush Gun
Shop Floor Programming/Conversational
RS-232 Interface
USB 2.0 Port
60 GB Solid State Hard Drive
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »