October

26

2″ x 2″ x .315″ Brand New Tauring Hydraulic 3 Drive Roll Angle Bender , Mdl. DS60BV Plus, Pyramid Style Bender, 3 Shafts are Gear Driven & Hardened, Self-Braking Motor, Rugged Cast Iron Frame, #SMDS60BVPLUS

2″ x 2″ x .315″ Brand New Tauring Hydraulic 3 Drive Roll Angle Bender , Mdl. DS60BV Plus, Pyramid Style Bender, 3 Shafts are Gear Driven & Hardened, Self-Braking Motor, Rugged Cast Iron Frame, #SMDS60BVPLUS

626-444-0311

http://www.sterlingmachinery.com/12403/Tauring+DS60BV+Plus/

Specification
Full Description

Capacity

Round Tube: 2.5″ x 0.120″ – Min. Radius 32″
3″ x 0.090″ – Min. Radius 56″

.

Square Tube: 0.75″ x 0.06″ – Min. Radius 6″
2.25″ x 0.120″ – Min. Radius 36″

.

Pipe: 2″ Sch. 40 – 2.375″ O.D.

.

Solid Round: 2″ – Min. Radius 20″
2.15″ – Min. Radius 36″

.

Rectangular Tube (Easy Way): 0.75″ x 0.50″ x 0.06″ – Min. Radius 6″
3″ x 1.5″ x 0.120″ – Min. Radius 6″

.

Solid Square: 1.25″ x 1.25″ – Min. Radius 24″
1.5″ x 1.5″ – Min. Radius 40″

.

Angle (Leg Out): 2″ x 0.315″ – Min. Radius 20″
2.25″ x 0.39″ – Min. Radius 28″

.

Angle (Leg In): 2″ x 0.315″ – Min. Radius 20″
2.25″ x 0.39″ – Min. Radius 28″

.

Flat Bar (Easy Way): 3″ x 1″ – Min. Radius 10″
4″ x 1″ – Min. Radius 12″

.

Flat Bar (Hard Way): 2.3″ x 0.75″ – Min. Radius 20″
3″ x 0.50″ – Min. Radius 36″

.

C-Channel (Easy Way) : 1″ x 0.50″ – Min. Radius 6″
2.5″ x 1″ – Min. Radius 24″

.

C-Channel (Hard Way): 1″ x 0.50″ – Min. Radius 6″
2.5″ x 1″ – Min. Radius 24″

.

T-Channel (Easy Way) : .3″ x 0.315″ – Min. Radius 10″
3.15″ x 0.375″ – Min. Radius 16″

.

T-Channel (Hard Way) : 2.3″ x 0.315″ – Min. Radius 10″
3.15″ x 0.375″ – Min. Radius 16″

.

Number Of Driving Rolls: 3
Shaft Diameter: 2″
Shaft Length: 4.5″
Shaft Speed: 8 RPM

.

Horsepower: 5.5 H.P.

Voltage

Dimensions (L x W x H): 26″ x 53″ x 59″
Weight: 1,250 Lbs.
Equipped With

Pyramid Style Bender
3 Shafts are Gear Driven & Hardened
Self-Braking Motor
Rugged Cast Iron Frame

RSS Feed

No comments yet.

Leave a comment

« | »