October

26

26″ x 16″ x 20″ Brand New Atrump Vertical CNC Maxi-Mill Machining Center, Mdl. E216 Maxi-Mill, Centroid M400S Control with 15″ LCD, 16 Tools ATC Armless, 7.5 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper, 6000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SME216

26″ x 16″ x 20″ Brand New Atrump Vertical CNC Maxi-Mill Machining Center, Mdl. E216 Maxi-Mill, Centroid M400S Control with 15″ LCD, 16 Tools ATC Armless, 7.5 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper, 6000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SME216

626-444-0311

http://www.sterlingmachinery.com/11640/Atrump+E216+Maxi-Mill/

Specification

Full Description

Basic Dimensions

Table: 14.2″ x 34.4″
Longitudinal Travel: 26″
Cross Travel: 16.1″
Vertical Travel: 20.1″
Spindle Nose To Table Top: 4.1″ to 24.2″
Load Capacity: 900 lbs
Spindle Taper: BT40 or CAT40
Spindle Speed: 6,000 RPM
Transmission of Spindle & Motor: Belts
Spindle Center to Column Front Surface: 17.7″

.

Feed Rate: X/Y/Z: 150 ipm DC, 320 ipm AC
Cutting Feed Rate: 1 to 120 ipm DC, 150 ipm AC

.

Motor

Spindle Motor: 7.5 H.P.
Feed Motors on XYZ: 29 in-lbs DC or 1kW-AC
Coolant Pump: 1/4 H.P.
Lubrication Pump: 150W

.

Automatic Tool Changer

Number of Tools: 16
Max. Tool Diameter: 3.54″
Max. Tool Weight: 15.4 Lbs.

.

Coolant Tank Capacity : 26 Gallons
Air Requirement: 90 – 100 psi

.

Warranty: 1 Year Limited Warranty
Horsepower: 18 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Size: 90″ x 83″ x 98.2″
Dimensions (L x W x H): 90″ x 83.1″ x 90″
Weight: 5500 lbs
Equipped With

Centroid M400S Control with 15″ LCD
16 Tools ATC Armless
7.5 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper
6000 rpm Spindle Speed
Hardened & Ground with Turcite-B Coating Guide Way
Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting
FC30 Meehanite Casting Main Frame
100% Laser Tested for Positioning Accuracy & Repeatability
Telescopic Steel Way Covers on all Three Axes
Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability
Coolant System
Air Blast System
Central Lubrication System
Built In Quartz Work Light
Leveling Bolts & Plate
Full Guarding
Air Blast & Coolant Flush Gun
Shop Floor Programming/Conversational
RS-232 Interface
USB 2.0 Port
60 GB Solid State Hard Drive
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »