October

27

16″/21″ x 40″ Brand New Atrump Precision Gap Bed Engine Lathe, Mdl. LD-1640, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8″, 3 Jaw Scroll Chuck 6″, 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10″, D1-6 Back Plate 8″, Complete Electric Control Unit, Tool Box & Kits, #SMLD1640

16″/21″ x 40″ Brand New Atrump Precision Gap Bed Engine Lathe, Mdl. LD-1640, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8″, 3 Jaw Scroll Chuck 6″, 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10″, D1-6 Back Plate 8″, Complete Electric Control Unit, Tool Box & Kits, #SMLD1640

626-444-0311

http://www.sterlingmachinery.com/11616/Atrump+LD-1640/

Specification

Full Description
Basic Dimension: 16″/21″ x 40″
Swing Over Bed: 16″
Swing Over Gap: 21-3/4″
Swing Over Cross Slide: 9-1/2″
Distance Between Centers: 40″

.

Bed

Width of Bed Ways: 10″
Top Slide Travel: 4″
Cross Slide Travel: 8″

.

Spindle

Spindle Nose Mounting: D1-6
Spindle Bore: 2-3/16″
Spindle Nose Taper & Sleeve: Outer M.T. #5, Inner M.T. #3
Range of Spindle Speeds: 12 Speed Gear Change
50 to 2000 rpm

.

Thread & Feed

Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0017″ to 0.0242″/rev
Range of Crossfeeds: 0.0013″ to 0.03919″/rev

.

Tailstock

Quill Taper: M.T. #4
Quill Travel: 4-3/8″

.

Motor

Main Spindle Motor: 5 H.P.
Coolant Pump Motor: 1/8 H.P.

.

Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 82″ x 34″ x 60″
Weight: 1896 lbs
Equipped With

Hardened & Ground Bed Ways
Hardened & Ground Gears in Headstock
Rapid Foot Break
Precision Taper Roller Bearing
Feed Rod is Equipped with Over Load Safety Clutch
Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding
Change Gears
Rear Splash Guard
Steady Rest
4 Jaw Independent Chuck 8″
3 Jaw Scroll Chuck 6″
4 Way Tool Post
Floor Stand
Follow Rest
Face Plate 10″
D1-6 Back Plate 8″
Complete Electric Control Unit
Tool Box & Kits

RSS Feed

No comments yet.

Leave a comment

« | »