October

31

16″ x 100″ Brand New Standard Modern Engine Lathe, Mdl. 16100, 10 H.P. Continuous Duty, 100″ Between Centers, D1-6″ Camlock – 3 Bearing Spindle, 18 Spindle Speeds 40 to 2000 RPM, Electric Brake – Self Actuating, All Hardened & Ground Gears – No Clutches, Direct Reading Speed Dial, Deep Bed Design, Super Stiff Bed – Ready for Future Tools, Full Length Rear Splash Guard, Hardened Quill with Tang Drive, Convenient Hi-Lo Neutral Shifter, Complete Range of Inch-Metric Threads (Switchable), No Transposing Gears, Feed Reverse & Lead Screw Reverse, Chip Clean Out – Front & Rear, Bi-Direction Auto Carriage Stop (Feeds & Threads), Combination Inch-Metric Dials, Nitrided Screw – Anti-Backlash Nuts, Standard 115V Electric Controls, Operation Manual, MADE IN NORTH AMERICA, #SM16100

16″ x 100″ Brand New Standard Modern Engine Lathe, Mdl. 16100, 10 H.P. Continuous Duty, 100″ Between Centers, D1-6″ Camlock – 3 Bearing Spindle, 18 Spindle Speeds 40 to 2000 RPM, Electric Brake – Self Actuating, All Hardened & Ground Gears – No Clutches, Direct Reading Speed Dial, Deep Bed Design, Super Stiff Bed – Ready for Future Tools, Full Length Rear Splash Guard, Hardened Quill with Tang Drive, Convenient Hi-Lo Neutral Shifter, Complete Range of Inch-Metric Threads (Switchable), No Transposing Gears, Feed Reverse & Lead Screw Reverse, Chip Clean Out – Front & Rear, Bi-Direction Auto Carriage Stop (Feeds & Threads), Combination Inch-Metric Dials, Nitrided Screw – Anti-Backlash Nuts, Standard 115V Electric Controls, Operation Manual, MADE IN NORTH AMERICA, #SM16100

626-444-0311

http://www.sterlingmachinery.com/12387/Racer+Machinery+International+Inc.++16100/

Specification
Full Description
Overall Capacity: 16″ x 100″

.

Swing Over Bed & Saddle: 17″
Swing Over Cross Slide: 10″
Distance Between Centers: 100″
Bar Capacity: 2″

.

Headstock

Spindle Speeds: 18
Speed Range: 40 – 2000 RPM
Spindle Nose – Camlock: D1-6″
Spindle Hole: 2.06″
Spindle Center: #4 MT

.

Feedbox

Feed & Thread Selections: 66
Inch Feed Range: 0.0015″ – 0.105″ /rev.
Inch Thread Range: 2 to 127 TPI
Metric Feed Range: 0.04mm – 2.67mm /rev.
Metric Thread Range: 0.2mm to 14mm

.

Tailstock

Quill Diameter: 2.44″
Quill Travel: 5″
Morse Taper with Tang: #4 MT
Off Set: +/- 0.75″

.

Carriage Cross Slide

Carriage Length on Bed : 18.25″
Carriage Bridge Width: 8.5″
Cross Slide Length: 20″
Cross Slide Travel: 8.5″
Compound Travel: 3.8″
Direct Reading Dial Graduation: 0.001″

.

Bed & Base

Bed Width: 11″
Bed Depth: 15″
Bed Length: 96″
Base Width: 31″
Base Length: 104″

.

Apron

Hand Wheel – 1 Revolution: 1″
Half Nuts: Double
High Speed Threading : to 800 RPM
Repeatability of Auto Carriage Stop: +/- 0.005″
Feed Torque Control : Variable

.

Warranty: 2 Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208/230/460/575V ~ 3 Phase
Dimensions (L x W x H): 148″ x 36″ x 60″
Weight: 3850 lbs
Equipped With

10 H.P. Continuous Duty
100″ Between Centers
D1-6″ Camlock – 3 Bearing Spindle
18 Spindle Speeds 40 to 2000 RPM
Electric Brake – Self Actuating
All Hardened & Ground Gears – No Clutches
Direct Reading Speed Dial
Deep Bed Design
Super Stiff Bed – Ready for Future Tools
Full Length Rear Splash Guard
Hardened Quill with Tang Drive
Convenient Hi-Lo Neutral Shifter
Complete Range of Inch-Metric Threads (Switchable)
No Transposing Gears
Feed Reverse & Lead Screw Reverse
Chip Clean Out – Front & Rear
Bi-Direction Auto Carriage Stop (Feeds & Threads)
Combination Inch-Metric Dials
Nitrided Screw – Anti-Backlash Nuts
Standard 115V Electric Controls
Operation Manual
MADE IN NORTH AMERICA

RSS Feed

No comments yet.

Leave a comment

« | »