October

31

17″ x 39″ Brand New Atrump CNC Lathe, Mdl. KL1640 Plus, Centroid T400i Control with 15″ Color LCD, 7.5 H.P. Spindle Motor, D1-6, 2-1/8″ through Hole Spindle, 2500 rpm Spindle Speed with Auto 2 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Positioning Accuracy: +/-0.0004″, Reputability: +/- 0.0002″, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMKL1640Plus

17″ x 39″ Brand New Atrump CNC Lathe,

17″ x 39″ Brand New Atrump CNC Lathe, Mdl. KL1640 Plus, Centroid T400i Control with 15″ Color LCD, 7.5 H.P. Spindle Motor, D1-6, 2-1/8″ through Hole Spindle, 2500 rpm Spindle Speed with Auto 2 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Positioning Accuracy: +/-0.0004″, Reputability: +/- 0.0002″, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMKL1640Plus

626-444-0311

http://www.sterlingmachinery.com/11594/Atrump+KL1640+Plus/

Specification
Full Description

Basic Dimensions

Height of Center: 8.6″
Swing Over Bed: 17.3″
Swing Over Cross Slide: 9.4″
Distance Between Centers: 39.3″

.

Bed

Width of Bed Ways: 11.8″

.

Spindle

Spindle Nose Mounting: D1-6
Spindle Bore: 2-1/8″
Taper of Spindle Bore: MT #6
Range of Spindle Speeds: L: 50 – 355 rpm
H: 352 – 2500 rpm
Longitudinal Travel (Z Axis): 31.5″
Cross Slide Travel (X Axis): 8.1″
Rapid Travel/Cutting Feed Rate: 590/196 ipm

.

Tool

Max. Size Cutting Tool: 1″

.

Tailstock

Quill Diameter: 2″
Quill Taper: MT #4
Quill Travel: 5.9″

.

Coolant Tank Capacity: 20 Gallons

.

Warranty: One Year Limited Warranty
Horsepower: 7.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 86″ x 47″ x 62″
Weight: 3520 lbs
Equipped With

Centroid T400i Control with 15″ Color LCD
7.5 H.P. Spindle Motor, D1-6, 2-1/8″ through Hole Spindle
2500 rpm Spindle Speed with Auto 2 Speed Gear Range
Hardened & Ground with Turcite-B Coating Guide Way
C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting
Positioning Accuracy: +/-0.0004″, Reputability: +/- 0.0002″
FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability
100% Laser Tested for Positioning Accuracy & Repeatability
Massive One Piece Casting Construction for Maximum Cutting Performance
Rugged Cast Iron Design to Provide Maximum Rigidity & Stability
Shop Floor Programming/Conversational
Coolant System
Central Lubrication System
Dual Hand Wheel for Manual Operation
Built-In Quartz Work Light
Leveling Bolts & Plate
Full Guarding
RS-232 Interface
USB 2.0 Port
60 GB Solid State Hard Drive
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »