October

31

42″/58″ x 125 Brand New Atrump Heavy Duty Gap Bed Large Swing Center Lathe, Mdl. XT-42200, Chuck Guard with Limit Switch, 4 Way Tool Post with T-slots, Coolant System, 20 H.P. Motor with Y-Delta Start on 6/9/10″ Bore Models, Auto Lube System, 4 Way Tool Post Lead Screw Support on 120″, Thread Dial, Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock, Lockable Main Switch, 18 Step Manual Gear Change on 6/9/10″ Bore Models, Halogen Work Light, Gears & Bed Ways Hardened and Ground, Leveling Bolts & Pads, Electrical Cabinet Ventilation Fans, Electromagnetic Spindle Brake, 6 Way Rapid Traverse, 6 Way Power Feed, Tool Box, Operation Manual, #SMXT42200

42″/58″ x 125 Brand New Atrump Heavy Duty Gap Bed Large Swing Center Lathe, Mdl. XT-42200, Chuck Guard with Limit Switch, 4 Way Tool Post with T-slots, Coolant System, 20 H.P. Motor with Y-Delta Start on 6/9/10″ Bore Models, Auto Lube System, 4 Way Tool Post Lead Screw Support on 120″, Thread Dial, Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock, Lockable Main Switch, 18 Step Manual Gear Change on 6/9/10″ Bore Models, Halogen Work Light, Gears & Bed Ways Hardened and Ground, Leveling Bolts & Pads, Electrical Cabinet Ventilation Fans, Electromagnetic Spindle Brake, 6 Way Rapid Traverse, 6 Way Power Feed, Tool Box, Operation Manual, #SMXT42200

626-444-0311

http://www.sterlingmachinery.com/11549/Atrump+XT-42200/

Specification

Full Description
Capacity: 42″/58″ x 125″
Swing Over Bed: 42″
Center Height: 22″
Swing Over Cross Slide: 29.52″
Swing Over Gap: 58.84″
Width of Gap: 22.44″
Width of Bed: 24″
Distance Between Centers: 125.98″

.

Workpiece Heights

Maximum Weight at Headstock: 4400 lbs
Between Centers Unsupported: 14520 lbs
Between Centers with 1 Steady Rest: 16500 lbs
Between Centers with 2 Steady Rest: 18700 lbs

.

Headstock

Spindle Bore: 6.1″ Diameter
A2-11
5~610 rpm (18 Steps)

.

Carriage

Cross Slide Feeds: 0.00137″ ~ 0.15748″
Cross Slide Travel: 27.55″
Compound Rest Travel: 14.96″
Tool Holder Size: 1.57″ x 1.57″

.

Feeds & Threads

Lead Screw Diameter: 1.96″ x 2TPI or 0.47″/pitch
Longitudinal Feeds: 0.00196″ ~ 0.05984″
Cross Feeds: 0.000984″ ~ 0.029921″
Threading Range (inch): 30 ~ 1 TPI
DP. Pitch Threads: 60 ~ 2 TPI

.

Tailstock

Tailstock Quill Diameter: 6.5″
Taper of Center: MT #6
Quill Travel: 11.8″

.

Power

Main Spindle Motor: 20 H.P.
Rapid Motor: 3/4 H.P.
Coolant Pump: 1/4 H.P.
Oil Pump: 12W

.

Weight: 17160 lbs
Warranty: One Year Limited Warranty
Equipped With

Chuck Guard with Limit Switch
4 Way Tool Post with T-slots
Coolant System
20 H.P. Motor with Y-Delta Start on 6/9/10″ Bore Models
Auto Lube System
4 Way Tool Post Lead Screw Support on 120″
Thread Dial
Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock
Lockable Main Switch
18 Step Manual Gear Change on 6/9/10″ Bore Models
Halogen Work Light
Gears & Bed Ways Hardened and Ground
Leveling Bolts & Pads
Electrical Cabinet Ventilation Fans
Electromagnetic Spindle Brake
6 Way Rapid Traverse
6 Way Power Feed
Tool Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »