Categories

Brands

November

3

4-3/8″ x 4-3/8″ x 1/2″ Used Faccin Angle Roll, Mdl. RCMI 110, #C5050

Category ANGLE ROLL, FACCINTags: 4-3/8" x 4-3/8" x 1/2" Used Faccin Angle Roll, Mdl. RCMI 110No brands

4-3/8″ x 4-3/8″ x 1/2″ Used Faccin Angle Roll, Mdl. RCMI 110, #C5050

626-444-0311

http://www.sterlingmachinery.com/12315/Faccin+RCMI+110/

Specification

Full Description

Capacity:	4-3/8″ x 4-3/8″ x 1/2″
Pipe:	4″ SCH 40…48″
Square Tube:	3-1/2″ x 5/16″
Angles- Leg In:	4″ x 1/2″ @ 60″
Angles- Leg Out:	4″ x 1/2″ @ 44″
Beam (Hard Way):	S4 x 9-1/2″ @ 80″
T Bar (Leg Out):	4″ x 1/2″ @ 32″
T Bar (Leg Down):	5″ x 1/2″ @ 50″
Flat Bar (Easy Way):	8″ x 1-3/8″ @ 50″
Rotation Speed:	0-16 ft/min
Round Tube:	4″ x .2″ @ 47″
Dimensions (W x D x H):	70″ x 72″ x 72″
Weight:	5,800 Lbs.
Round Bar:	3″ to 32″
Horsepower:	20 H.P.
Shaft Diameter:	4.33″
Roll Diameter:	13.8″
Controller Dimensions:	28″ x 37″ x 46″

No comments yet.

Leave a comment

« 65 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P65, Automatic Hold Down, Punch Holder, Urethane Stripper, & Die Block, Set of Angle Knives, Set of Coper Knives, Coupling Wrench, 3/8″ Allen Wrench, Foot Pedal, Set of 12-1/8″ Plate Shear Knives, Instruction/Parts Book/Video, 5 Punch & Die Sets 9/16″ Through 1-1/16″, Set of 1″ Round Bar Knives, Set of Chip Buckets, Extra Filter Element, #SMP65 | 3 Ton x 6″ Used Multipress Hydraulic Press, Mdl. W5A-3P, Dual Palm Control, Start/Stop Push Buttons, Stand, #A4416 »

Weblog powered by Wordpress.

Theme Design by Devolux.org. Icons by famfamfam.com.

Copyright © 2009. All rights reserved.