November

4

155 Ton x 10′ Brand New U.S. Industrial Hydraulic Press Brake, Mdl. USHB155-10, Ram Deflection Adjustment, Mechanical Ram Depth Control, Massive Torsion Bar for Parallelism, Forged Heavy Duty Cylinder and Cylinder Body, Three Speed Ram, Rapid Approach, Bending Cycle and Rapid Retreat, Bottom Time Delay, Inching, Single Cycle and Continuous Operation, Solid Ram Tool Clamps (5 Section on Ram), Ram Takes Standard American Tooling (1/2″ x 5/8″), Free Gooseneck Punch & Multi-Opening Die for Up To 90 Degree Forming in 10 Ga. Mild Steel, Front Operated Power Back Gauge, #SMUSHB15510

155 Ton x 10′ Brand New U.S. Industrial Hydraulic Press Brake, Mdl. USHB155-10, Ram Deflection Adjustment, Mechanical Ram Depth Control, Massive Torsion Bar for Parallelism, Forged Heavy Duty Cylinder and Cylinder Body, Three Speed Ram, Rapid Approach, Bending Cycle and Rapid Retreat, Bottom Time Delay, Inching, Single Cycle and Continuous Operation, Solid Ram Tool Clamps (5 Section on Ram), Ram Takes Standard American Tooling (1/2″ x 5/8″), Free Gooseneck Punch & Multi-Opening Die for Up To 90 Degree Forming in 10 Ga. Mild Steel, Front Operated Power Back Gauge, #SMUSHB15510

626-444-0311

http://www.sterlingmachinery.com/12415/U.S.+Industrial+USHB155-10/

Specification

Full Description
Capacity: 155 Ton x 10′
Length of Bed & Ram: 125.9″
Distance Between Housings: 106″
Throat: 12.5″
Ram Stroke: 5.9″
Ram Adjustment: 2.75″
Open Height: 16.3″

Ram Speeds

Approach: 2.4″/sec
Return: 2″/sec
Press: Dependent on Tool Load
Hydraulic Tank Capacity: 80 Gallons
Horsepower: 15 H.P.
Voltage: Request On Order
Dimensions (L x W x H): 148″ x 64″ x 101″
Weight: 22,000 Lbs.
Equipped With

Ram Deflection Adjustment
Mechanical Ram Depth Control
Massive Torsion Bar for Parallelism
Forged Heavy Duty Cylinder and Cylinder Body
Three Speed Ram
Rapid Approach, Bending Cycle and Rapid Retreat
Bottom Time Delay
Inching, Single Cycle and Continuous Operation
Solid Ram Tool Clamps (5 Section on Ram)
Ram Takes Standard American Tooling (1/2″ x 5/8″)
Free Gooseneck Punch & Multi-Opening Die for Up To 90 Degree Forming in 10 Ga. Mild Steel
Front Operated Power Back Gauge

RSS Feed

No comments yet.

Leave a comment

« | »