November

14

19″ x 60″ Brand New Atrump CNC Lathe, Mdl. 1960NC, Centroid T400i Control with 15″ Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1960NC

19″ x 60″ Brand New Atrump CNC Lathe, Mdl. 1960NC, Centroid T400i Control with 15″ Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1960NC

626-444-0311

http://www.sterlingmachinery.com/11599/Atrump+1960NC/

Specification
Full Description
Overall Capacity: 19″ x 60″

.

Height of Center: 10″
Swing Over Bed: 19″
Swing Over Cross Slide: 10.2″
Distance Between Centers: 60″

.

Bed

Width of Bed Ways: 13″

.

Spindle

Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8″
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto 3 Speed Shift
10 to 1800 rpm Nose Test Max 78dB
Longitudinal Travel (Z Axis): 56.25
Cross Slide Travel (X Axis): 11″
Rapid Travel/Cutting Feed Rate: 270/120 ipm

.

Tool

Max. Size Cutting Tool: 1″

.

Tailstock

Quill Diameter: 3″
Quill Taper: MT #5
Quill Travel: 6-1/4″

.

Coolant Tank Capacity: 20 Gallons

.

Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96″ x 74″ x 79″
Weight: 5060 lbs
Equipped With

Centroid T400i Control with 15″ Color LCD
10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle
Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range
Hardened & Ground with Turcite-B Coating Guide Way
C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting
FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability
100% Laser Tested for Positioning Accuracy & Repeatability
Massive One Piece Casting Construction for Maximum Cutting Performance
Rugged Cast Iron Design to Provide Maximum Rigidity & Stability
Shop Floor Programming/Conversational
Coolant System
Central Lubrication System
Dual Hand Wheel for Manual Operation
Built-In Quartz Work Light
Leveling Bolts & Plate
Full Guarding
RS-232 Interface
USB 2.0 Port
60 GB Solid State Hard Drive
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »