November

21

12″ x 10″ Brand New SuperTec 3-Axis CNC Die Sinker EDM with 40 Amp Power Supply, Mdl. CNC330, CNC Control with 15″ Color Screen, PC Based Control with User Friendly Conversational Language, 3 Axis DRO, Axes Driven by D.C. Servo Motors with High Efficiency PWM Drivers, 1 Micron Linear Scale Feed Back on X, Y, Z Axes, Special Canned Cycles, Automatic Multi-Stop Machining, Rapid Up/Down of Z Axis, Plane Rotating & Single Side Burning Cycles for all Axes in all Directions, Isoplus/Isopower Discharging Circuit, “Extra Fine” Cycle, Fine Burning Function, Digitizing ARC Detection, 499 Sets of Working Parameters, Lateral & Orbital Machining, #SMCNC330

12″ x 10″ Brand New SuperTec 3-Axis CNC Die Sinker EDM with 40 Amp Power Supply, Mdl. CNC330, CNC Control with 15″ Color Screen, PC Based Control with User Friendly Conversational Language, 3 Axis DRO, Axes Driven by D.C. Servo Motors with High Efficiency PWM Drivers, 1 Micron Linear Scale Feed Back on X, Y, Z Axes, Special Canned Cycles, Automatic Multi-Stop Machining, Rapid Up/Down of Z Axis, Plane Rotating & Single Side Burning Cycles for all Axes in all Directions, Isoplus/Isopower Discharging Circuit, “Extra Fine” Cycle, Fine Burning Function, Digitizing ARC Detection, 499 Sets of Working Parameters, Lateral & Orbital Machining, #SMCNC330

626-444-0311

http://www.sterlingmachinery.com/12085/Supertec+CNC330/

Specification

Full Description
X & Y Axis Travel : 11.8″ x 9.8″
Z Axis (Quill) Travel : 5.9″
W Axis (Head) Travel : 5.9″
Distance Table ~ Head: 7.5″ ~ 19″
Work Table Dimensions: 29″ x 20″ x 14″
Max. Work Piece Weight: 880 lbs
Max. Electrode Weight: 220 lbs
Work Tank Capacity: 75 Gallons
Work Table Area (L x W): 23.6″ x 11.8″
Dimensions (L x W x H): 53″ x 52″ x 86″
Weight: 2420 lbs
Equipped With

CNC Control with 15″ Color Screen
PC Based Control with User Friendly Conversational Language
3 Axis DRO
Axes Driven by D.C. Servo Motors with High Efficiency PWM Drivers
1 Micron Linear Scale Feed Back on X, Y, Z Axes
Special Canned Cycles
Automatic Multi-Stop Machining
Rapid Up/Down of Z Axis
Plane Rotating & Single Side Burning Cycles for all Axes in all Directions
Isoplus/Isopower Discharging Circuit
“Extra Fine” Cycle
Fine Burning Function
Digitizing ARC Detection
499 Sets of Working Parameters
Lateral & Orbital Machining

RSS Feed

No comments yet.

Leave a comment

« | »