November

22

13″/19″ x 40″ Brand New Atrump Precision Engine Lathe, Mdl. LD-1340, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Gap Bed, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8″, 3 Jaw Scroll Chuck 6″, 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10″, Complete Electric Control Unit, Tool Box & Kits, #SMLD1340

13″/19″ x 40″ Brand New Atrump Precision Engine Lathe,

13″/19″ x 40″ Brand New Atrump Precision Engine Lathe, Mdl. LD-1340, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Gap Bed, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8″, 3 Jaw Scroll Chuck 6″, 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10″, Complete Electric Control Unit, Tool Box & Kits, #SMLD1340

626-444-0311

http://www.sterlingmachinery.com/11540/Atrump+LD-1340/

Specification

Full Description

Basic Dimension

Swing Over Bed: 13″
Swing Over Gap: 19-1/4″
Swing Over Saddle: 7-5/8″
Distance Between Centers: 40″

.

Bed

Width of Bed Ways: 7-9/16″
Top Slide Travel: 4″
Cross Slide Travel: 6-1/2″

.

Spindle

Spindle Nose Mounting: STD: D1-4
Spindle Bore: 1-1/2″
Spindle Nose Taper & Sleeve: Outer M.T. #5, Inner M.T. #3
Range of Spindle Speeds: 9 Speed Gear Change
80 to 2000 rpm

.

Thread & Feed

Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0026″ to 0.0638″/rev
Range of Crossfeeds: 0.0013″ to 0.03919″/rev

.

Tailstock

Quill Taper: M.T. #3
Quill Travel: 4″

.

Motor

Main Spindle Motor: 3 H.P
Coolant Pump Motor: 1/8 H.P.

.

Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 73″ x 30″ x 58″
Weight: 1322 lbs
Equipped With

Hardened & Ground Bed Ways
Hardened & Ground Gears in Headstock
Rapid Foot Break
Precision Taper Roller Bearing
Feed Rod is Equipped with Over Load Safety Clutch
Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding
Gap Bed
Change Gears
Rear Splash Guard
Steady Rest
4 Jaw Independent Chuck 8″
3 Jaw Scroll Chuck 6″
4 Way Tool Post
Floor Stand
Follow Rest
Face Plate 10″
Complete Electric Control Unit
Tool Box & Kits

RSS Feed

No comments yet.

Leave a comment

« | »