November

23

15″ x 24″ Brand New SuperTec Universal Cylindrical Grinder, Mdl. G38P-60NC, 7.5 H.P. Spindle Motor on Wheelhead, Cartridge Type Spindle on Wheelhead, Grinding Wheel with Flange, One V & One Flat Guideway on Wheelhead, Table Dial Guage, Carbide Tip Centers, Splash Guard, Leveling Screws with Blocks, Balancing Arbor, Diamond Dresser (fixed on table), Wheel Extractor, Automatic Lubrication System, Coolant System, Swivel Table with Dial Indicator, Tool Box with Adjusting Tools, Operation Manual with Parts List, #SMG38P60NC

15″ x 24″ Brand New SuperTec Universal Cylindrical Grinder,

15″ x 24″ Brand New SuperTec Universal Cylindrical Grinder, Mdl. G38P-60NC, 7.5 H.P. Spindle Motor on Wheelhead, Cartridge Type Spindle on Wheelhead, Grinding Wheel with Flange, One V & One Flat Guideway on Wheelhead, Table Dial Guage, Carbide Tip Centers, Splash Guard, Leveling Screws with Blocks, Balancing Arbor, Diamond Dresser (fixed on table), Wheel Extractor, Automatic Lubrication System, Coolant System, Swivel Table with Dial Indicator, Tool Box with Adjusting Tools, Operation Manual with Parts List, #SMG38P60NC

626-444-0311

http://www.sterlingmachinery.com/12082/Supertec+G38P-60NC/

Specification
Full Description

Capacity

Distance Between Centers: 24″
Swing Over Table: 15″
Max. Grinding Diameter: 14″
Max. Load Held Between Centers: 330 lbs

.

Wheel Head

Hand Feed Travel: 7.8″
Auto Incremental Infeed (CII): 0.0001″ ~ 0.0999″
Hand Wheel per Division: 0.0002″
Hand Wheel per Revolution: 0.08″
Infeed Travel: 9.6″
Top Slide Sliding Travel: 7″
Swivel Angle: +/- 30°
Automatic Rapid Travel: 1.75″

.

Grinding Wheel

Diameter x Width x Bore: 16″ x 2″ x 5″
Grinding Wheel Speed: 1650 RPM

.

Table

Swivel Angle: +/- 9°
Traverse Speed: 1.2″ ~ 275″/minute
Hand Wheel per Revolution: 0.39″

.

Work Head

Swivel Angle: 90°
Center Taper: MT 4
Spindle Speed: 30 ~ 350 RPM

.

Tailstock

Center Taper: MT 4
Quill Travel: 1″

.

Internal Grinding Spindle

Spindle Speed: 18,000 RPM or 25,000 RPM
Max. Grinding Bore: 4.33″ or 2.17″
Max. Chucking Length: 8″ ~ 12.4″
Max. Chucking Diameter: 6″

.

Horsepower/Motor

Wheel Spindle: 7.5 H.P.
Work Head: 2 H.P.
Hydraulic Pump: 2 H.P.
Coolant Pump: 0.25 H.P.
Internal Grinder: 2 H.P.

.

Dimensions (L x W x H): 119″ x 90″ x 79″
Weight: 9460 lbs
Equipped With

7.5 H.P. Spindle Motor on Wheelhead
Cartridge Type Spindle on Wheelhead
Grinding Wheel with Flange
One V & One Flat Guideway on Wheelhead
Table Dial Guage
Carbide Tip Centers
Splash Guard
Leveling Screws with Blocks
Balancing Arbor
Diamond Dresser (fixed on table)
Wheel Extractor
Automatic Lubrication System
Coolant System
Swivel Table with Dial Indicator
Tool Box with Adjusting Tools
Operation Manual with Parts List

RSS Feed

No comments yet.

Leave a comment

« | »