January

18

750 Ton x 16′ Used Cincinnati CNC Hydraulic Press Brake, Mdl. 750FM12, Hurco Autobend 7 Controller with AB5/S8 Backgauge, Foot Pedal, Remote Pedestal Control with Dual Pal Buttons, Tonnage Control, Wide Bed Die Holder (21-3/4″ wide x 7-3/4″ high, 4 Way Die Holder (17-1/4″ inside with 5-1/4″ wide, (3) 48″ x 7″ Angle Brackets on Each Side of Die Holder, #CD5073

750 Ton x 16′ Used Cincinnati CNC Hydraulic Press Brake, Mdl. 750FM12, Hurco Autobend 7 Controller with AB5/S8 Backgauge, Foot Pedal, Remote Pedestal Control with Dual Pal Buttons, Tonnage Control, Wide Bed Die Holder (21-3/4″ wide x 7-3/4″ high, 4 Way Die Holder (17-1/4″ inside with 5-1/4″ wide, (3) 48″ x 7″ Angle Brackets on Each Side of Die Holder, #CD5073

626-444-0311

http://www.sterlingmachinery.com/12565/Cincinnati+750FM12/

Specification
Full Description
Capacity: 750 Ton x 16′
Length of Bed & Ram: 16′
Distance Between Housings: 12′ 6″
Ram Stroke: 12″
Shut Height: 10″
Open Height: 22″

Ram Speeds

Fast Press: 110 IPM
Medium: 55 IPM
Low: 19 IPM
Return: 73 IPM
Press: 36 IPM
Type: CNC/Hydraulic

Equipped With

CNC Controller: Hurco Autobend 7
Backgauge: Yes
Horsepower: 60 H.P.

Voltage

Front Apron Pit Required: 48″

Dimensions (W x D x H)

Weight: 98,400 Lbs.
Equipped With

Hurco Autobend 7 Controller with AB5/S8 Backgauge
Foot Pedal
Remote Pedestal Control with Dual Pal Buttons
Tonnage Control
Wide Bed Die Holder (21-3/4″ wide x 7-3/4″ high
4 Way Die Holder (17-1/4″ inside with 5-1/4″ wide
(3) 48″ x 7″ Angle Brackets on Each Side of Die Holder

RSS Feed

No comments yet.

Leave a comment

« | »