March

16

13″ x 34″ Brand New Standard Modern Military Engine Lathe, Mdl. 1334 Military, Camlock Dog Plate Assembly, Headstock/Tailstock Center #3 Morse Taper, Reduction Sleeve #5 to #3 Morse Taper, Hardened & Ground Bed Ways, Electric Brake, Spare Shear Pins & Keys, Standard Open Drip Proof Motor, Camlock Wrench, Tool Post Wrench 3/8″ Square Opening, Swivel Base Wrench 3/4″ Opening, Splash Guard, Leveling Pads, 2 H.P. Continuous Duty, CSA Approved Electrical, Operations Manual (Instructions & Spare Parts), MADE IN NORTH AMERICA, Center Sleeve, Quick Change Tool Post, Face Plate, Micrometer Bed Stop, 17 pc 5C Collets, 4 Jaw Chuck, 3 Jaw Chuck, Drawbar Collet Attachment, Steady Rest, Follow Rest, Drill Chuck, Live Center, Dog Set (1/2″ – 2″) Single Screw Bent Tail, Lathe Tool Holder Set, Wrench Set, Round Tool Post, Tailstock Reducing Sleeve, #SM1334Military

13″ x 34″ Brand New Standard Modern Military Engine Lathe,

13″ x 34″ Brand New Standard Modern Military Engine Lathe, Mdl. 1334 Military, Camlock Dog Plate Assembly, Headstock/Tailstock Center #3 Morse Taper, Reduction Sleeve #5 to #3 Morse Taper, Hardened & Ground Bed Ways, Electric Brake, Spare Shear Pins & Keys, Standard Open Drip Proof Motor, Camlock Wrench, Tool Post Wrench 3/8″ Square Opening, Swivel Base Wrench 3/4″ Opening, Splash Guard, Leveling Pads, 2 H.P. Continuous Duty, CSA Approved Electrical, Operations Manual (Instructions & Spare Parts), MADE IN NORTH AMERICA, Center Sleeve, Quick Change Tool Post, Face Plate, Micrometer Bed Stop, 17 pc 5C Collets, 4 Jaw Chuck, 3 Jaw Chuck, Drawbar Collet Attachment, Steady Rest, Follow Rest, Drill Chuck, Live Center, Dog Set (1/2″ – 2″) Single Screw Bent Tail, Lathe Tool Holder Set, Wrench Set, Round Tool Post, Tailstock Reducing Sleeve, #SM1334Military

626-444-0311

http://www.sterlingmachinery.com/12658/Racer+Machinery+International+Inc.++1334+Military/

Specification

Full Description
Overall Capacity: 13″ x 34″

.

Swing Over Bed & Saddle Wings: 13″
Swing Over Cross Slide: 7-3/4″
Distance Between Centers: 34″

.

Headstock

Spindle Speeds: 12
Speed Range: 36 – 1800 RPM
Spindle Nose – Camlock: D1 – 4″
Spindle Through Hole: 1-3/8″ diameter
Spindle Nose Taper: #5 MT
Spindle Center: #3 MT

.

Feedbox

Feed & Thread Selections: 54
Range of Threads: 4 – 224 TPI
Feed Rates : 0.001″ – 0.062″ long
0.0005″ – 0.031″ cross
Lead Screw: 1″ dia. x 6 TPI Acme
Feedshaft: 9/16″ Hex.

.

Bed

Width at Top: 8-1/2″
Depth: 7″
Width of Front Saddle Guide Vee: 1″

.

Tailstock

Spindle Diameter & Length: 1-9/16″ dia. x 8″
Spindle Travel: 4″
Spindle Taper Hole: #3 MT
Set Over Each Side of Center: 3/4″

.

Saddle

Length of Ways: 15″
Width of Bridge: 6″
Cross Slide Travel: 7″
Compound Slide Travel: 3-1/4″
Tool Holder – Shank Size: 1/2″ x 1-1/8″

.

Apron

Threading & Feed Levers Interlocked Against Simultaneous Engagement
Anti-Friction Bearings on Rack Pinion & Hand Wheel Shafts
Single Lever Operates Longitudinal & Cross Feed
Double Walled – Fully Lubricated
Threading Lever Convenient to Threading Dial
Double Half Nuts

.

Warranty: 2 Year Limited Warranty
Horsepower: 2 H.P.

Voltage

Dimensions (L x W x H): 67″ x 34″ x 56″
Weight: 1450 lbs
Equipped With

Camlock Dog Plate Assembly
Headstock/Tailstock Center #3 Morse Taper
Reduction Sleeve #5 to #3 Morse Taper
Hardened & Ground Bed Ways
Electric Brake
Spare Shear Pins & Keys
Standard Open Drip Proof Motor
Camlock Wrench
Tool Post Wrench 3/8″ Square Opening
Swivel Base Wrench 3/4″ Opening
Splash Guard
Leveling Pads
2 H.P. Continuous Duty
CSA Approved Electrical
Operations Manual (Instructions & Spare Parts)
MADE IN NORTH AMERICA
Center Sleeve
Quick Change Tool Post
Face Plate
Micrometer Bed Stop
17 pc 5C Collets
4 Jaw Chuck
3 Jaw Chuck
Drawbar Collet Attachment
Steady Rest
Follow Rest
Drill Chuck
Live Center
Dog Set (1/2″ – 2″) Single Screw Bent Tail
Lathe Tool Holder Set
Wrench Set
Round Tool Post
Tailstock Reducing Sleeve

RSS Feed

No comments yet.

Leave a comment

« | »