March

16

65 Ton Brand New Geka Hydraulic Ironworker, Mdl. Bendicrop 60s, 5 Working Stations Actuated By Two Hydraulic Cylinders., Bending Station, Flat Bar Shear, 40″ Calibrated Electric Length Gauge, Round Punch & Die Starter Set, 2- Electric Foot Pedals, Flat Bar Blades, Triangular Notching with Table, Micrometer Fine Adjustment, Machined Notcher Gauging Table, Punch Station, Hydraulic Drive, Electric Stop, 1-1/2″ & 3″ V Bending Dies, #SMBENDICROP60S

65 Ton Brand New Geka Hydraulic Ironworker, Mdl. Bendicrop 60s, 5 Working Stations Actuated By Two Hydraulic Cylinders., Bending Station, Flat Bar Shear, 40″ Calibrated Electric Length Gauge, Round Punch & Die Starter Set, 2- Electric Foot Pedals, Flat Bar Blades, Triangular Notching with Table, Micrometer Fine Adjustment, Machined Notcher Gauging Table, Punch Station, Hydraulic Drive, Electric Stop, 1-1/2″ & 3″ V Bending Dies, #SMBENDICROP60S

626-444-0311

http://www.sterlingmachinery.com/12693/Geka+Bendicrop+60s/

Specification

Full Description
Tonnage: 65 Ton
Throat Depth: 10″
Length Of Blade: 14″
Strokes Per Minute: 32

Capacity

Punch: 1-1/2″ x 7/16″
Maximum Punching Capacity: 1-1/2″
Angle Shear: 4″ x 4″ x 1/2″ (90°)
Angles Square: 4″ x 4″ x 1/2″
Round Bar: 2″
Square Bars: 1-1/2″

Plate Shear

Flat Bar: 14″ x 9/16″
14″ x 1/2″ at 5 Degrees

Notcher

Thickness: 3/8″
Depth: 3-1/2″
Width: 1-9/16″

Press Brake Attachment

Maximum Thickness: 6″ x 3/8″
Working Height: 51-5/8″
Horsepower: 7.5 H.P.
Dimensions (L x W x H): 83″ x 55″ x 63″
Weight: 3,525 Lbs.
Equipped With

5 Working Stations Actuated By Two Hydraulic Cylinders.
Bending Station
Flat Bar Shear
40″ Calibrated Electric Length Gauge
Round Punch & Die Starter Set
2- Electric Foot Pedals
Flat Bar Blades
Triangular Notching with Table
Micrometer Fine Adjustment
Machined Notcher Gauging Table
Punch Station
Hydraulic Drive
Electric Stop
1-1/2″ & 3″ V Bending Dies

RSS Feed

No comments yet.

Leave a comment

« | »