April

17

18″ Used Hyd-Mech Automatic Tilting Vertical Bandsaw, Mdl. V-18A, Hydraulic Guide Arm, Bar Feed, Hydraulic Vise & Tilting, Chain Driven Chip Anger, Powered Blade Brush, Coolant System & Wash Down Hose & Nozzle, #A4801

18″ Used Hyd-Mech Automatic Tilting Vertical Bandsaw, Mdl. V-18A, Hydraulic Guide Arm, Bar Feed, Hydraulic Vise & Tilting, Chain Driven Chip Anger, Powered Blade Brush, Coolant System & Wash Down Hose & Nozzle, #A4801

626-444-0311

http://www.sterlingmachinery.com/12726/Hyd-Mech+V-18A/

Specification
Full Description
Capacity: Horizontal: 18″
Vertical: 20″
@ 45 Degrees, Right/ Left: 14″
Blade Speed: 75 – 400SFM
Blade Size: 1 1/4″ x 0.042 x 14’6″
Bundling Capacity: @ 90 Degrees: 12″
@ 45 Degrees: 6″
Blade Wheel Diameter: 19″
Bar Feed Rate: 0 – 15 IPM
Shuttle Stroke (Max.): 40″
Max. Workload Capacity: 8000 LBS.
Dimensions ( L x W x H ): 145″ x 100″ x 97″
Weight: 7500 LBS.
Equipped With

Hydraulic Guide Arm
Bar Feed
Hydraulic Vise & Tilting
Chain Driven Chip Anger
Powered Blade Brush
Coolant System & Wash Down Hose & Nozzle

RSS Feed

No comments yet.

Leave a comment

« | »