29
BRAND NEW GEKA HYDRAULIC IRONWORKER 185 Ton BRAND NEW GEKA HYDRAULIC IRONWORKER, Mdl. HydraCrop165S, Magnetic Work Light, Rectangular Coper Notcher, Round Punch & Die Starter Set, Machined Notcher Gauging Table, 40″ Calibrated Electric Length Gauge, Machined Punch Gauging Table with X & Y Scales and Backstop, Support & Miter Table for Plate Shear, Quick Change Punch Holder, Offset Punch & Die Holder, (2) Foot Pedals, #SMHYDRACROP165S
GEKA, Hydraulic, ironworker
Tags: #SMHYDRACROP165S, 40" Calibrated Electric Length Gauge, BRAND NEW GEKA HYDRAULIC IRONWORKER 185 Ton BRAND NEW GEKA HYDRAULIC IRONWORKER, Machined Notcher Gauging Table, Machined Punch Gauging Table with X & Y Scales and Backstop, Magnetic Work Light, Mdl. HydraCrop165S, Offset Punch & Die Holder, Quick Change Punch Holder, Rectangular Coper Notcher, Round Punch & Die Starter Set, Support & Miter Table for Plate ShearNo brands
| Tonnage | 185 Ton |
|---|---|
| Shears for Flatbar | |
| Flatbar (with slight deformation) | 30″ x 3/4″ |
| Working Height | 34-1/4″ |
| Length Of Blade | 30-1/8″ |
| Shears for Section Iron | |
| Shearing Power | 300 Ton |
| L at 90 Degrees without Deformation | 8″ x 8″ x 3/4″ |
| L at 45 Degrees (2 Legs) | 2-3/4″ x 2-3/4″ x 1/4″ |
| L at 90 Degrees (with slight deformation) | 8″ x 8″ x 1″ |
| Shear for Bars | |
| Round Bar | 2-3/8″ |
| Square Bar | 2-3/8″ |
| Notching | |
| Plate Thickness | 5/8″ |
| Angle of | 4-3/4″ |
| Depth | 4-3/8″ |
| Width | 2-1/4″ |
| Punching | |
| Punching Power | 185 TOn |
| Maximum Capacity | 1-1/2″ x 1-1/4″ |
| Die with Gooseneck Die Holder | 1-3/8″ x 1-3/8″ |
| Throat | 20″ |
| Stroke | 4″ |
| Punch Stroke per Minute | 31 |
| Working Height | 43-3/4″ |
| Horsepower | 20 H.P. |
| Dimensions (Wx D x H) | 112″ x 64″ x 87″ |
| Magnetic Work Light |
| Rectangular Coper Notcher |
| Round Punch & Die Starter Set |
| Machined Notcher Gauging Table |
| 40″ Calibrated Electric Length Gauge |
| Machined Punch Gauging Table with X & Y Scales and Backstop |
| Support & Miter Table for Plate Shear |
| Quick Change Punch Holder |
| Offset Punch & Die Holder |
| (2) Foot Pedals |
No comments yet.
Leave a comment
« Brand New Clausing Geared Head Engine Lathe 13″/18″ x 40″ Brand New Clausing Geared Head Engine Lathe, Mdl. 8027J, Fully-geared headstock with 12 spindle speeds from 40 – 2500 rpm 13″, 16 spindle speeds from 25 – 2000 rpm 15″, All headstock gears are hardened and ground, Headstock shafts are splined and turn on anti-friction bearings, Spindle bearings, gears and shafts are lubricated by a forced lubrication system, A broad range of Feed and Thread selections are available by using three selector levers and an 8-position rotary dial, Precision Gamet spindle bearings, Cross slide runs along a dovetail guide, Bed wipers and an apron mounted one-shot lubrication pump, The cast iron apron is totally enclosed and splash bath lubricated, Gap Bed with easy-to-remove bed blocks, Equipped with chuck guard, full splash guard and leadscrew cover, Clutch drive, reverse leadscrew with spindle turning for faster thread cutting, Extra wide bed provides accuracy and minimal wear, Coolant System, Inch Threading Dial, Two 3MT Centers, Center Bushing, Accuracy Chart, Set of Wrenches and Keys, Parts and Instruction Manuals, State-of-the-art AC Spindle Drive features surface mount technology to give compact size and high reliability, 1 Year Warranty, Three headstock gear ranges a wide spread of constant power – 33 to 1 – better than most CNC lathes, Electromagnetic Spindle Brake, #SM8027J | Brand New Lagun Precision High Speed Gear Head Lathe (Colchester Type) with Clutch Headstock 15″ x 50″ Brand New Lagun Precision High Speed Gear Head Lathe (Colchester Type) with Clutch Headstock, Mdl. AT-1550-G-TW, Colchester Type Engine Lathe, Chip and Coolant Tray, Foot Brake, Full Length Rear Splash Guard, Compound Protection Guard (without limit switch), Manual Indexing Square 4 Position Tool Post, Back Plate, 2 MT4 Centers & Main Spindle Reduction Sleeve, Matrix Disk Clutch, Lead Screw Protection Cover, Halogen Work Light, Operator Protection Guard Compound Mounted, Coolant System, Threading Dial, Leveling Bolts & Pads, Tailstock Quill with Tang, Inch/Metric Dials on Compound & Cross Slide (Direct Readings), Tool Box, Operation Manual, #SMAT1550GTW »