29
Used Acra-Turn Gap Bed Engine Lathe 12″/17″ x 36″ Used Acra-Turn Gap Bed Engine Lathe, Mdl. 12X36GH, 4 Way Tool Post, 6″ 3 Jaw Chuck, Cabinet Stand, Drill Chuck, Face Plate, #A4999
Acra, Engine Lathe, GAP BED, USED
Tags: 4 Way Tool Post, 6" 3 Jaw Chuck, Cabinet Stand, Drill Chuck, Face Plate, Mdl. 12X36GH, Used Acra-Turn Gap Bed Engine Lathe 12"/17" x 36" Used Acra-Turn Gap Bed Engine LatheNo brands
| Capacity | 12″/17″ x 36″ |
|---|---|
| Swing Over Gap | 17″ |
| Swing Over Bed | 12″ |
| Distance Between Centers | 36″ |
| Length of Gap | 5″ |
| Swing Over Carriage | 7″ |
| Width of Bed | 7-1/4″ |
| Spindle Nose | D1 – 4 |
| Diameter of Spindle Bore | 1-1/2″ |
| Taper of Spindle Center | MT #3 |
| Spindle Speeds (9 Steps) | 70-1400 RPM |
| Longitudinal Feeds | .001-.0311″/Rev (40 Kinds) |
| Cross Feeds | .0004-.0105″/Rev (40 Kinds) |
| Metric Threads | 0.2-4.5mm (30 Kinds) |
| Inch Threads | 4 – 112 TPI (40 Kinds) |
| Max. Travel of Cross Slide | 6-7/8″ |
| Max Travel of Top Slide | 3-3/4″ |
| Diameter of Tail Stock Quill | 4″ |
| Voltage | 220V/1 Phase |
| Dimensions (L x W x H) | 62″ x 34″ x 55″ |
| 4 Way Tool Post |
| 6″ 3 Jaw Chuck |
| Cabinet Stand |
| Drill Chuck |
| Face Plate |
No comments yet.
Leave a comment
« Brand New AutoSert Hydraulic Insertion Press 36″ Brand New AutoSert Hydraulic Insertion Press , Mdl. AS-10-36″, Rigid Construction: 2″ Thick Steel Center Main Frame, 10 Ton Capacity, 36″ Throat Depth, Uniform Hydraulic Pressure by Design, Redundant Safety System Internally Monitored by a Micro-Controller, Easy Access to All Machine Controls (Standing or Sitting), Quick Change Tooling, Sensitive Pressure Sensing Device, Digital Countdown Counter for Fasteners, Digital Counter for Part Production (has Reset Button & Automatic Record), #SMAS1036 | Brand New Lagun Precision CNC Touch Turn Lathe 18″ x 40″ Brand New Lagun Precision CNC Touch Turn Lathe , Mdl. 20-LL-TTP-ST-1840, Siemens 828D CNC Controls, Automatic 8 Station Turret with Tool Holders, Dual Programming, Profile Editor, Electronic Hand Wheels for X & Z Axis, Headstock Equipped with Servomotor & Main Spindle Direct Drive, Manual Tailstock, Coolant Equipment, Automatic Lubrication for Slide Ways, Main Spindle Reducing Bush & Dead Centers, Chip Tray, Work Light, Tower Lamp, Enclosure According to EC Standards, Leveling Plates, Precision Pre-Loaded Ball Screws, 3 Bearing Spindle, Meehanite Casting, Instruction Manual, CE Compliant, #SM20LLTTPST1840 »