July

28

6000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine, Mdl. NF PRO VENTO 420, CNC Control Unit, Cutting Head, Suction System, Resonator, Hydraulic Blocks, Sheet Holder, Signal Lamp, Filter For Exhaust Gases, Rack Pinion, QBH Cable Entry For Laser Beam, Extended Protective Glass For Ray Efficiency, Colimation Module With Automatic Adjustment Of Focus Position, Enhanced Safety Cartridge Cover, Developed With Ceramic Adapter, Crust Reduction Control, Blow Piercing, Head Retraction Method, Lateral Air Blowing System, 3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC, Installation, Training (4 Days), Nozzle Cleaning, Radan CAD/CAM-System, Dust Separator System, Training For The CAD/CAM System (3 Days), Automatic Nozzle Changer, Linear Drives, Pipe Cutting, Automation: Load/Unload Station, #SMNFPROVENTO420

6000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine,6000 Watts Brand New Nukon CNC Fiber Laser Cutting Machine, Mdl. NF PRO VENTO 420, CNC Control Unit, Cutting Head, Suction System, Resonator, Hydraulic Blocks, Sheet Holder, Signal Lamp, Filter For Exhaust Gases, Rack Pinion, QBH Cable Entry For Laser Beam, Extended Protective Glass For Ray Efficiency, Colimation Module With Automatic Adjustment Of Focus Position, Enhanced Safety Cartridge Cover, Developed With Ceramic Adapter, Crust Reduction Control, Blow Piercing, Head Retraction Method, Lateral Air Blowing System, 3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC, Installation, Training (4 Days), Nozzle Cleaning, Radan CAD/CAM-System, Dust Separator System, Training For The CAD/CAM System (3 Days), Automatic Nozzle Changer, Linear Drives, Pipe Cutting, Automation: Load/Unload Station, #SMNFPROVENTO420

626-444-0311

 

http://www.sterlingmachinery.com/12212/Nukon+NF+PRO+VENTO+420/

 

Specification
Full Description
Capacity: 6,000 Watts

Cutting Capacities

Mild Steel: .984″
Stainless Steel: .787″
Aluminum: .393″
Copper: .393″
Brass: .393″
Laser Source IPG: 100,000 Hours
Maximum Output: 6,000 Watts
Output Stability: +/- 2 Percent

Pulse Mode

Frequency: 5 – 2,000 Hz
Power: 0-100 Percent
Laser Fiber Diameter: 0.00393″
Beam Mode: Direct
Laser Safety: Mechanical Safety Valve
Cooling Water Flow Rate: 40 l/min
Maximum Worksheet Size: 79″ x 159″
Maximum Load Weight: 4,409 lbs.
Number of Controlled Axes: 4 Axis (X,Y,W,Z)
Maximum Speed: 160/260 m/min
X-Axis: 79″
Y-Axis: 159″
Z-Axis: 7.87″

Acceleration

X,Y,Z Axis with Servo Motor: 1,5 G
Positioning Accuracy: +/-0.05 mm/m
Repeatability: +/-0.02 mm
Pallet Changer Table & Cycle Time: 2 pcs./ 45 Seconds

Cutting Gases

Steel: Oxygen (0.1 – 6 Bar)
Stainless Steel: Nitrogen (0.2 – 20 Bar)
Aluminum: Dry Air or Nitrogen (0.2 – 20 Bar)

Cutting Head Features

CAD/CAM Software: RANDAN/ LANTEK

CNC Features

Name: PA 8,000
CNC Control Unit: Intel Celeron 2 GHZ (Or Better)
Control of Operating System: Advance Reader System
Controller Axis: 4 Axis: Y(Y,W),X, Z
Minimum Value of The Correction: 0.001
Programming Version: Code Program System & ISO/EIA

Inputs

MDI Key Input
Marking Device
External Keyboard and Mouse

Input Ports

USB 2.0 x 4 Port
Input/Output For Program
Keyboard Connection
Mouse Connection
RS-232 Port (Maks.9600 bps) Optional
2 PS/2 Interface
DNC for Interface
Storage: Hard Disk: 80 GB; Program Memory Capacity 20GB
Lan Port: Lan Port (External Connection RJUS-10/100)
Display: 19″ TFT, Touch Screen
Servo System: Digital
Positioning: Absolute Encoder
Parallel Port: LPT

Optical System

Focus Length: 6″

Increment/Focus Length

BIMO-FSC Manual Focus Set Up: .059″/6″
BIMO-FSC Automatic Focus Length Set Up: .059″/6″, .07″/7.8″
BIMO-FSC Automatic Focus Length and Diameter Control: .04″-.12″/6″, .062″-.16″/6″
Maximum Laser Power: 6000 Watts
Maximum Beam Parameter Acceptance (Half Angle) of Laser Light Exiting Fiber: 97 Percent Power Content Within 125 MRAD
Wave Length: 1,025 – 1,080 NM
Omission: >97 Percent @ 1,064 NM
Diameter of The Fiber: .0000393″ – .0393″ (Standard)
Laser Light Cable Receiver: HIGHYAG LLK-HP (LLK-B), LLK-Auto (LLK-D), QBH

Nozzle

Diameter: .0039″ – .787″
X & Y Setting: +/- 0.039″

Focus To Nozzle Position Range

BIMO-FSC With Motorized Z Focus Position: 0.19″ In Head Direction – 0.19″ In Work Piece Direction

Distance Measuring Module FJB

Calibration Range: 0.0039″ – 0.787″
Output Signal: 0 – 10 V (Distance)
Response Time: <1 msec

Supply

Electricity: DC 24V, 8 Amp, (BIMO-FSC With Motorized Z Focus Position and Diameter)
Pneumatic: 0.2 MPa
Pressure Of The Gas: Until 2.5 MPa
Gas: Active Inert Gas
Cooling: Flow Rate 2 l/min, Temperature 15-35 Degree Celsius
PLC/Field Bus System: Hard Wired

Cutting Head Dimensions

BIMO-FSC With Beam Bending Module 0 Degrees: 5.3″ x 4.5″ x 17.3″ (WxDxH)
BIMO-FSC With Beam Bending Module 90 Degrees: 13.4″ x 4.5″ x 15.3″ (WxDxH)
Weight: 14 Lbs.
Horsepower: 80 H.P.
Dimensions (L x W x H): 34′ x 12′ x 8′
Weight (Machine): 47,500 lbs.
Equipped With

CNC Control Unit
Cutting Head
Suction System
Resonator
Hydraulic Blocks
Sheet Holder
Signal Lamp
Filter For Exhaust Gases
Rack Pinion
QBH Cable Entry For Laser Beam
Extended Protective Glass For Ray Efficiency
Colimation Module With Automatic Adjustment Of Focus Position
Enhanced Safety Cartridge Cover
Developed With Ceramic Adapter
Crust Reduction Control
Blow Piercing
Head Retraction Method
Lateral Air Blowing System
3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC
Installation
Training (4 Days)
Nozzle Cleaning
Radan CAD/CAM-System
Dust Separator System
Training For The CAD/CAM System (3 Days)
Automatic Nozzle Changer
Linear Drives
Pipe Cutting
Automation: Load/Unload Station

 

 

RSS Feed

No comments yet.

Leave a comment

« | »