August

1

78″ x 33″ x 27″ Brand New Atrump CNC Bed Milling Machine, Mdl. BM-760H, Centroid M400 Control with 15″ LCD, 20 Tools ATC Armless, 20 H.P. Spindle Motor, BT40 or CAT40 Spindle Bore, 8000 RPM Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Meehanite Casting Main Frame, Box Ways Design on Y Axis, Table Guard, RS-232 Interface, 60GB Solid State Hard Drive, USB 2.0 Port, Shop Floor Programming/Conversational, Leveling Bolts & Plate, Splash Guard, Halogen Work Light, Auto Lube/Coolant System, Air Blast, Coolant Flush Gun, Tools and Tool Box, Operation Manual, #SMBM760H

78″ x 33″ x 27″ Brand New Atrump CNC Bed Milling Machine,

78″ x 33″ x 27″ Brand New Atrump CNC Bed Milling Machine, Mdl. BM-760H, Centroid M400 Control with 15″ LCD, 20 Tools ATC Armless, 20 H.P. Spindle Motor, BT40 or CAT40 Spindle Bore, 8000 RPM Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Meehanite Casting Main Frame, Box Ways Design on Y Axis, Table Guard, RS-232 Interface, 60GB Solid State Hard Drive, USB 2.0 Port, Shop Floor Programming/Conversational, Leveling Bolts & Plate, Splash Guard, Halogen Work Light, Auto Lube/Coolant System, Air Blast, Coolant Flush Gun, Tools and Tool Box, Operation Manual, #SMBM760H

626-444-0311

http://www.sterlingmachinery.com/12184/Atrump+BM-760H/

Specification
Full Description
Capacity: 78″ x 33″ x 27″
X-Axis Travel: 78.5″
Y-Axis Travel: 33″
Z-Axis Travel: 27.5″
Table Size: 32″ x 86″
Load Capacity: 4400 lbs
Spindle Nose to Table Top: 3.9″ x 31.4″
Spindle Center to Column Front Surface: 35.4″
Spindle Taper: BT40 or CAT40
Spindle Speed: 8,000 RPM
Transmission of Spindle & Motor: Belt Driven

.

Feed Rate

Rapid Feed Rate: 400 ipm AC
Cutting Feed Rate: 100 ipm AC

.

Automatic Tool Changer

Number of Tools: 20
Maximum Tool Diameter: 3.54″
Maximum Tool Weight: 15.4 lbs

.

Coolant Capacity: 26 Gallons

.

Motor

Spindle Motor: 20 H.P.
Feed Motors on XYZ: 4 H.P.
Coolant Pump: 1/4 H.P.
Lubrication Pump: 0.20 H.P. (150 W)

.

Voltage: 208V – 230V ~ 3 Phase
Dimensions (L x W x H): 91″ x 165″ x 102″
Weight: 16,500 lbs
Equipped With

Centroid M400 Control with 15″ LCD
20 Tools ATC Armless
20 H.P. Spindle Motor
BT40 or CAT40 Spindle Bore
8000 RPM Spindle Speed
Hardened & Ground with Turcite-B Coating Guide Way
FC30 Meehanite Casting Main Frame
Box Ways Design on Y Axis
Table Guard
RS-232 Interface
60GB Solid State Hard Drive
USB 2.0 Port
Shop Floor Programming/Conversational
Leveling Bolts & Plate
Splash Guard
Halogen Work Light
Auto Lube/Coolant System
Air Blast, Coolant Flush Gun
Tools and Tool Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »