October

19

9″ x 49″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. 2EV, Electronic Variable Speed 3 H.P. Spindle Motor, R8 Spindle Taper, 5 H.P. Inverter, Digital Output 5000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, One Shot Lubrication System, Built-In Quartz Work Light, Draw Bar, Tools & Box, Operation Manual, #SM2EV

9″ x 49″ Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. 2EV, Electronic Variable Speed 3 H.P. Spindle Motor, R8 Spindle Taper, 5 H.P. Inverter, Digital Output 5000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″, One Shot Lubrication System, Built-In Quartz Work Light, Draw Bar, Tools & Box, Operation Manual, #SM2EV

626-444-0311

http://www.sterlingmachinery.com/11513/Atrump+2EV/

Specification

Full Description
Capacity: 9″ x 49″

.

Table: 9″ x 49″
Longitudinal Travel: 36″
Cross Travel: 12″
Quill Travel: 5″
Knee Travel (Manual): 16″
Quill Diameter: 3-3/8″
Spindle Nose to Table Top: 3/4″ to 16-3/4″
Load Capacity: 600 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8″ to 27-7/8″
Ram Travel: 12″

.

Head

Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees

.

Motor

Spindle Motor: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: One Shot

.

Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 101″ x 70″ x 82″
Weight: 2600 lbs
Equipped With

Electronic Variable Speed 3 H.P. Spindle Motor, R8 Spindle Taper
5 H.P. Inverter
Digital Output 5000 rpm Spindle Speed with Hi/Lo Gear
Hardened & Ground with Turcite-B coating Guide Way
C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
Anti-Rust Chrome Quill
Standard Way Covers on all 3 Axis
Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002″
One Shot Lubrication System
Built-In Quartz Work Light
Draw Bar
Tools & Box
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »