October

21

41″ x 22″ x 24″ Brand New Atrump Vertical CNC Maxi-Mill Machining Center, Mdl. E422, Centroid M400S Control with 15″ LCD, 16 Tools ATC Armless, 10 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper, 6000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Metal Enclosure, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 120 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SME422

41″ x 22″ x 24″ Brand New Atrump Vertical CNC Maxi-Mill Machining Center,

41″ x 22″ x 24″ Brand New Atrump Vertical CNC Maxi-Mill Machining Center, Mdl. E422, Centroid M400S Control with 15″ LCD, 16 Tools ATC Armless, 10 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper, 6000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Leveling Bolts & Plate, Full Metal Enclosure, Air Blast & Coolant Flush Gun, Shop Floor Programming/Conversational, RS-232 Interface, USB 2.0 Port, 120 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SME422

626-444-0311

http://www.sterlingmachinery.com/11644/Atrump+E422/

Specification
Full Description

Basic Dimensions

Table: 18.8″ x 48.8″
Longitudinal Travel: 41.7″
Cross Travel: 22″
Vertical Travel: 24″
Spindle Nose To Table Top: 4.8″ x 28.9″
Load Capacity: 2000 lbs
Spindle Taper: BT40 or CAT40
Spindle Speed: 6,000 RPM
Transmission of Spindle & Motor: Belts
Spindle Center to Column Front Surface: 23.6″

.

Feed Rate: X/Y/Z: 320 ipm AC
Cutting Feed Rate: 160 ipm AC

.

Motor

Spindle Motor: 10 H.P.
Feed Motors on XYZ: 1 kW – AC
Coolant Pump: 1/4 H.P.
Lubrication Pump: 150W

.

Automatic Tool Changer

Number of Tools: 16
Max. Tool Diameter: 3.54″
Max. Tool Weight: 15.4 Lbs.

.

Coolant Tank Capacity : 26 Gallons
Air Requirement: 90 – 100 psi

.

Warranty: 1 Year Limited Warranty
Horsepower: 18 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Size: 127.2″ x 89.6″ x 95.5″
Dimensions (L x W x H): 98.4″ x 90″ x 90″
Weight: 9460 lbs
Equipped With

Centroid M400S Control with 15″ LCD
16 Tools ATC Armless
10 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper
6000 rpm Spindle Speed
Hardened & Ground with Turcite-B Coating Guide Way
Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting
FC30 Meehanite Casting Main Frame
100% Laser Tested for Positioning Accuracy & Repeatability
Telescopic Steel Way Covers on all Three Axes
Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability
Coolant System
Air Blast System
Central Lubrication System
Built In Quartz Work Light
Leveling Bolts & Plate
Full Metal Enclosure
Air Blast & Coolant Flush Gun
Shop Floor Programming/Conversational
RS-232 Interface
USB 2.0 Port
120 GB Solid State Hard Drive
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »