November

14

24″ x 40″ Brand New Atrump CNC Lathe, Mdl. KL2440, Centroid T400i Control with 15″ Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14″ Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2440

24″ x 40″ Brand New Atrump CNC Lathe,

24″ x 40″ Brand New Atrump CNC Lathe, Mdl. KL2440, Centroid T400i Control with 15″ Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14″ Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2440

626-444-0311

http://www.sterlingmachinery.com/11608/Atrump+KL2440/

Specification

Full Description
Overall Capacity: 24″ x 40″

.

Height of Center: 12″
Swing Over Bed: 24″
Swing Over Cross Slide: 13.5″
Distance Between Centers: 40″
Width of Bed Ways: 13.78″

.

Spindle

Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8″
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High – Middle – Low
2000~491 – 490~125 – 124~25 rpm
Longitudinal Travel (Z Axis): 34.5″
Cross Slide Travel (X Axis): 11.6″
Rapid Travel/Cutting Feed Rate: 270/120 ipm

.

Tool

Max. Size Cutting Tool: 1 ” (4 Way Tool Post)

.

Tailstock

Quill Diameter: 2.5″
Quill Taper: MT #5
Quill Travel: 7″

.

Coolant Tank Capacity: 6 Gallons

.

Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96″ x 74″ x 77″
Weight: 6270 lbs
Equipped With

Centroid T400i Control with 15″ Color LCD
10 H.P. Spindle Motor, D1-8, 3-3/8″ through Hole Spindle
Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range
Hardened & Ground with Turcite-B Coating Guide Way
C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting
FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability
100% Laser Tested for Positioning Accuracy & Repeatability
Massive One Piece Casting Construction for Maximum Cutting Performance
14″ Wide Bed Ways Designed to Provide Maximum Rigidity & Stability
Coolant System
Central Lubrication System
Built-In Quartz Work Light
Dual Hand Wheel for Manual Operation
USB 2.0 Port
RS-232 Interface
60 GB Solid State Hard Drive
Leveling Bolts & Plate
Full Guarding
Shop Floor Programming/Conversational
Tool Box & Tools
Operation Manual

RSS Feed

No comments yet.

Leave a comment

« | »