December

23

1/4″ x 13′ Brand New U.S. Industrial Hydraulic Shear, Mdl. US1325, Squaring Arm, 39.5″ from Blade to End, High Carbon, High Chrome Shear Blades, Ball Transfers on Each Table Segment, Manual Quick Change Blade Gap Adjustment, Stroke Counter, Front Operated Power Back Gauge With Digital Readout, Blade Guard, Micro Switch Protected, Hydraulic, Electrical Overload Protection, Automatic Swing-Up on Back Gauge, Bolt on Table Segments (6), Hold-downs Faced with Anti-Mar Neoprene, Swing Beam Design, Pressure Sensing Hold Downs, Electric Stroke Adjustment, Operator Console Control, Shadow Lighting, Low Noise Gear Pump, Support Arms, #SMUS1325

1/4″ x 13′ Brand New U.S. Industrial Hydraulic Shear,

1/4″ x 13′ Brand New U.S. Industrial Hydraulic Shear, Mdl. US1325, Squaring Arm, 39.5″ from Blade to End, High Carbon, High Chrome Shear Blades, Ball Transfers on Each Table Segment, Manual Quick Change Blade Gap Adjustment, Stroke Counter, Front Operated Power Back Gauge With Digital Readout, Blade Guard, Micro Switch Protected, Hydraulic, Electrical Overload Protection, Automatic Swing-Up on Back Gauge, Bolt on Table Segments (6), Hold-downs Faced with Anti-Mar Neoprene, Swing Beam Design, Pressure Sensing Hold Downs, Electric Stroke Adjustment, Operator Console Control, Shadow Lighting, Low Noise Gear Pump, Support Arms, #SMUS1325

626-444-0311

http://www.sterlingmachinery.com/12483/U.S.+Industrial+US1325/

Specification

Full Description
Capacity (Mild Steel): 1/4″ x 13′
Shearing Capacity: 1/4″ Mild Steel @ 65,000 psi

.

Type: Hydraulic

.

Maximum Cutting Length/Sheet Size: 157″
Rake Angle/Shear Angle : 1 degree 30′
Strokes Per Minute: 10
Throat Depth: 4.7″

.

Back Gauge: Yes
Adjustment Range of Back Gauge: 0.75″ – 36″

.

Hydraulic Oil Capacity: 66 Gallons

.

Horsepower: 15 H.P.
Voltage: Request On Order
Dimensions (L x W x H): 182″ x 66″ x 66″
Weight: 22,046 lbs
Equipped With

Squaring Arm, 39.5″ from Blade to End
High Carbon, High Chrome Shear Blades
Ball Transfers on Each Table Segment
Manual Quick Change Blade Gap Adjustment
Stroke Counter
Front Operated Power Back Gauge With Digital Readout
Blade Guard, Micro Switch Protected
Hydraulic, Electrical Overload Protection
Automatic Swing-Up on Back Gauge
Bolt on Table Segments (6)
Hold-downs Faced with Anti-Mar Neoprene
Swing Beam Design
Pressure Sensing Hold Downs
Electric Stroke Adjustment
Operator Console Control
Shadow Lighting
Low Noise Gear Pump
Support Arms

RSS Feed

No comments yet.

Leave a comment

« | »