January

16

13″ x 60″ Brand New Atrump CNC Bed Mill, Mdl. A3-10H, Centroid M400i Control with 15″ Color LCD, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Dovetail Way on X, Standard Roller Way Cover on Rear Y & Z, Telescopic Metal Way Cover on Front Y, Coolant System, Auto Lubrication System, Built-In Quartz Work Light, Table Guard, Leveling Bolts & Plate, Half Enclosed Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMA310H

13″ x 60″ Brand New Atrump CNC Bed Mill,

13″ x 60″ Brand New Atrump CNC Bed Mill, Mdl. A3-10H, Centroid M400i Control with 15″ Color LCD, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Dovetail Way on X, Standard Roller Way Cover on Rear Y & Z, Telescopic Metal Way Cover on Front Y, Coolant System, Auto Lubrication System, Built-In Quartz Work Light, Table Guard, Leveling Bolts & Plate, Half Enclosed Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMA310H

626-444-0311

http://www.sterlingmachinery.com/11523/Atrump+A3-10H/

Specification

Full Description
Table: 13″ x 60″
Longitudinal Travel: 39.9″
Cross Travel: 19.9″
Vertical Travel: 19.6″
Saddle Size: 47.2″
Spindle Nose to Table Top: 3.9″ to 24.4″
Spindle Taper: CAT40/BT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62″ x 3″ x 2.55″
Transmission Of Spindle & Motor: Belt

.

Feed Rate

Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 120 ipm

.

Motor

Spindle Motor/Max Torque: 10 H.P.
Servo Motors on XYZ: 1 kW – AC
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W

.

Automatic Tool Changer

Maximum Tool Diameter: 3.5″
Maximum Tool Weight: 15 lbs

.

Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Space: 135.8″ x 111.8″
Dimensions (L x W x H): 91.4″ x 69.6″ x 91.7″
Weight: 4600 lbs
Equipped With

Centroid M400i Control with 15″ Color LCD
8000 rpm Spindle Speed
Hardened & Ground with Turcite-B Coating Guide Way
Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting
FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability
100% Laser Tested for Positioning Accuracy & Repeatability
Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability
Dovetail Way on X
Standard Roller Way Cover on Rear Y & Z
Telescopic Metal Way Cover on Front Y
Coolant System
Auto Lubrication System
Built-In Quartz Work Light
Table Guard
Leveling Bolts & Plate
Half Enclosed Splash Guard
60 GB Solid State Hard Drive
RS-232 Interface
USB 2.0 Port
Shop Floor Programming/ Conversational
Tool Box W/Tools
Operation Manuals

RSS Feed

No comments yet.

Leave a comment

« | »