9
1/2″ X 12′ USED ACCURSHEAR HYDRAULIC POWER SHEAR, MDL. 850012, FRONT OPERATED POWER BACK GAUGE W/ INDICATOR, LOCATED IN VANCOUVER, BC, QUICK RAKE ANGLE ADJUSTMENT, LENGTH OF CUT ADJUSTMENT, SWING AWAY BACKGAUGE, #C5090
ACCURSHEAR, Power Shear, USED
Tags: 1/2" x 12' Used Accurshear Hydraulic Power Shear, BC, Front Operated Power Back Gauge W/ Indicator, LENGTH OF CUT ADJUSTMENT, Located In Vancouver, Mdl. 850012, QUICK RAKE ANGLE ADJUSTMENT, SWING AWAY BACKGAUGENo brands
1/2″ X 12′ USED ACCURSHEAR HYDRAULIC POWER SHEAR, MDL. 850012, FRONT OPERATED POWER BACK GAUGE W/ INDICATOR, LOCATED IN VANCOUVER, BC, QUICK RAKE ANGLE ADJUSTMENT, LENGTH OF CUT ADJUSTMENT, SWING AWAY BACKGAUGE, #C5090
626-444-0311
http://www.sterlingmachinery.com/used-accurshear-hydraulic-power-shear-13987.html
| CAPACITY (MILD STEEL) | 1/2″ |
|---|---|
| MAXIMUM CUTTING LENGTH | 144″ |
| RAKE ANGLE | 7/16″ |
| NUMBER OF HAND DOWNS (HYDRAULIC) | 16 |
| THROAT | 12″ |
| STROKES PER MINUTE | |
| FULL STROKE | 18 |
| SHORT STROKE | 42 |
| DIMENSIONS (L X D X H) | 180″ x 90″ x 99″ |
| WEIGHT | 34,000 Lbs. |
| Front Operated Power Back Gauge w/ Indicator |
| Located In Vancouver, BC |
| Quick Rake Angle Adjustment |
| Length of Cut Adjustment |
| Swing Away Backgauge |
No comments yet.
Leave a comment
« 90 TON BRAND NEW PIRANHA HYDRAULIC IRONWORKER, MDL. P90, AUTOMATIC HOLD DOWN, PUNCH HOLDER, URETHANE STRIPPER, & DIE BLOCK, 5 PUNCH & DIE SETS 9/16″ THROUGH 1-1/16″, SET OF ANGLE KNIVES, SET 1-1/4″ ROUND BAR KNIVES, SET OF 14-5/8″ PLATE SHEAR KNIVES, SET OF COPER KNIVES, COUPLING WRENCH, FOOT PEDAL, EXTRA FILTER ELEMENT, SET OF CHIP BUCKETS, 3/8″ ALLEN WRENCH, INSTRUCTION/PARTS BOOK/VIDEO, #SMP90 | 16 GA. X 52″ BRAND NEW ACRA HYDRAULIC SHEAR, MDL. FS-P5216H, FRONT AND BACK SHEET METAL PLATES COVERED TO SAFETY AND PROTECTION SYSTEM, GUARDED “FOOT SWITCH” FOR MORE CONVENIENT TO OPERATIONS AND SAFETY, OPERATOR CONTROL CUTTING ACTION FOR BURR-FREE SHEARING OPERATIONS, MAXIMUM GAGE CAPACITIES ARE APPLICABLE WHEN USING MILD STEEL, FRAMES & TABLE MADE BY HIGH TENSILE CAST IRON, THE SHEARING BLADE MADE BY HIGH CARBON-HIGH CHROME, HYDRAULIC PUMP IS A VARIABLE VOLUME, PRESSURE COMPENSATED VANE PUMP, #SMFSP5216H »