2
3/8″ x 10′ Used Heller “Deep Throat” Hydraulic Swing Beam Shear, Swing Beam Design, One Shot Manual Lube, Rake Control, Front Operated Power Back Gauge W/Indicator, Overhead Shear Cutting Line Lights, GAP Clearance Control, #A4940
HELLER, Hydraulic, shearTags: 3/8" x 10' Used Heller "Deep Throat" Hydraulic Swing Beam Shear, Front Operated Power Back Gauge W/Indicator, GAP Clearance Control, One Shot Manual Lube, Overhead Shear Cutting Line Lights, Rake Control, Swing Beam DesignNo brands
3/8″ x 10′ Used Heller “Deep Throat” Hydraulic Swing Beam Shear, Swing Beam Design, One Shot Manual Lube, Rake Control, Front Operated Power Back Gauge W/Indicator, Overhead Shear Cutting Line Lights, GAP Clearance Control, #A4940
626-444-0311
Type | Hydraulic |
---|---|
Maximum Cutting Length | 123″ |
Throat | 7″ |
Number of Hold Downs (Hydraulic) | 15 |
Backgauge | Front Operated Power Backgauge With Indicator |
Back Gauge Range | 36′ |
Horsepower | 20 H.P. |
Voltage | 460V ~ 3 Phase |
Dimensions (W x D x H) | 144″ x 77″ x 97″ |
Weight | 17,000 Lbs. |
Swing Beam Design |
One Shot Manual Lube |
Rake Control |
Front Operated Power Back Gauge W/Indicator |
Overhead Shear Cutting Line Lights |
GAP Clearance Control |
No comments yet.
Leave a comment
« 230 Ton x 12′ Used Cincinnati CNC Hydraulic Press Brake, Mdl. 230CBx10, Note: This Machine Does Not Require A Pit All Above Ground, Hurco Autobend 7 CNC Back Gauge, Pedestal Palm Control With Emergency Stop, Electric Foot Pedal, Light Curtains, RE-CHROMED and RE-GROUND CYLINDERS WITH NEW SEALS! #A4923 | 12″ x 11″ Brand New DoALL CNC Horizontal Bandsaw, Mdl. S-320CNC, SAW MICRO HMI Saw Control, Overfeed Protection, Discharge Chute, Digital Readout of Cutting Angle, Pulley Driven Band Brush, Work Light, Work Height Sensor, Variable Frequency Drive, Flood Coolant, Tool Kit, One DoAll Bi-Metal Saw Blade, Complimentary DoAll Cutting Fluids Package, Instruction & Parts Manuals on CD, Emergency Stop Button for Immediate Shutdown of Saw, Control Panel has Angular DRO Display, #SMS320CNC »